DPF Decal is confusing

whatsupdoc

Active member

Equipment
L3302
Jul 9, 2024
125
129
43
USA
So the other day I had the regen light start blinking on the tractor and and I ended up doing a parked regen. All three lights were on, one I believe was blinking and there was no beeping.

So as its doing its thing I looked at the DPF decal and realized that in column 1 under where it
says "Do this" "Push button(light off)" they are using it as a noun a thing not a verb like to push a button.
 

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
3,313
1,732
113
Kansas City, KS
If one reads the decal from top to bottom, it makes perfect sense.
The second line says, "If tractor is being used indoors, or in a combustible area, push the INHIBIT button (will light up)."

If you have pressed the inhibit switch, you need to press it again to shut off the light. If the light is not on in the inhibit switch, there is no need to press the button. You just rev up the engine until the increase RPMs light extinguishes and continue to run.
 
  • Like
Reactions: 1 users

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
15,222
4,419
113
SW Pa
One more reason to keep the gobermint out of everyday life