Correct Tube for 27x10.50-15 tire?

[L35]

Can someone point me in the right direction for some tubes for the front tires on my L35? I would like to make sure the stem is in the correct location it seems like there is a lot of variations out there. The tire size is 27x10.50-15 and it has the metal style stem installed currently.

Thanks

 

[North Idaho Wolfman]

http://www.ebay.com/itm/27X8-50-15-...Parts_Accessories&hash=item2329bcb4ea&vxp=mtr

 

[L35]

I saw those when I googled the tire size but wasn't sure if they would work with my rim. Thanks for the recommendation

 

[tiredguy]

Most tubes are combination sized and yours would be a
27x850/950/1050-15. Most all that are sized that way have the TR15 or
TR15CW ( CW=chloride/water ) rubber valve stem.
In my experience ( I sell tubes for a living ) the best for a 27x1050-15
is actually the 11L15 ( or 11L15/16 combo )because the combo runs smaller than what's needed on the wider rim that you have.
That size is actually a tubeless tire and most of them unless it's needed due
to a repair really aren't required.
Al

 

[L35]

I did order 1 of the tubes that was listed in the link. It's the combo tube (850,950,1050). I have a small cut in the sidewall I can't successfuly patch, so I'm going to a tube. Thanks for the reply.

 

[North Idaho Wolfman]

I did order 1 of the tubes that was listed in the link. It's the combo tube (850,950,1050). I have a small cut in the sidewall I can't successfuly patch, so I'm going to a tube. Thanks for the reply.

Take an old tube and boot the cut area, if it's a big cut it wouldn't hurt to put a couple of patches over the hole to protect the tube.

 

[L35]

Roger wilco

 

[L35]

Well about 2 months later I finally got this tube installed and it fit well, valve stem worked out well, hopefully no more flats for a while