CNC rubber mats for my L2501 HST

[mdhughes]

I really like the mats, but I have found a small problem with having them on my L3901DT, you really have to push down hard on the clutch pedal when you engage the PTO. Not a big problem, just have to remember to do it. From what I can tell, the rubber on the peddle is hitting the floor mat.

In case someone reading this doesn't know, the L3901DT has a two stage clutch.

 

[gatrs4u]

I would like to know if these would fit on my L3700SU

 

[fried1765]

Noice. You cut those on the CNC? You wouldn't happen to have a drawing/model you'd be willing to share, would you?

I don't have a CNC, but I do have access to a plotter, I could print out a 1:1 and try my best at cutting/drilling by hand.
I'm a little worried about sand/moisture getting underneath there and rotting the floorboard away, but at the same time, it's not as permanent (read, "easier to back out of") as going the rhino lining way.

The mats look great!
The problem is that sand/grit builds up underneath, and when wet, promotes rust.
I threw my OEM mats away, and applied Herculiner instead.

 

[Cathy Liebchen]

Ken makes great mats and they reduce foot fatigue

 

[MountainMeadows]

The new floor mats for the L3302 also fit the L2501.

HST part numbers
No code has to be inserted here.

 

[gatrs4u]

I would like to know if these would fit on my L3700SU
checked with my dealer, the L3700HST and the L3901HST has the same floor plan.

 

[TeachercoachMT]

I want to take a moment and thank all who have purchased mats and I have enjoyed the conversations we have had! I continue to offer mats for some of the L-series HST and now include some of the L-series DT models. After searching Messick’s & Kubota’s website here is a list of compatible models I found. There may be other compatible models that I didn’t search. The mats are easy to install and remove for cleaning no hardware needed. Send me a PM if interested. Thanks

HST Mats for Models (RH Pan Prt# TC420-57483)
L2501, L3301, L3901, L3200 (serial# > 84376), L3800 (serial# > 84931

DT Mats for Models (RH Pan Prt# TC420-29900
L2501D, L2501F, L3200Dt, L3200F, L3800Dt, L3800F

DT Mats for Models (New):
L3301DT (RH Pan# TC620-29902)
L3301F (RH Pan# TC620-29902)
L3901DT (RH Pan# TC620-29902)
L3901F (RH Pan# TC620-29902)

View attachment 62462 View attachment 62463 View attachment 62464 View attachment 62465 View attachment 62466

How can I purchase the mats for my my 2501?

 

[Hawk67]

How can I purchase the mats for my my 2501?

Hello, I sent you a PM within Orange Tractor form. Thanks

 

[Bad4mot]

I would like to buy some for my L2501HST. Please send me some info. Thank you

 

[Paul Speer]

My first forum. I shared these on someone else’s existing forum but not sure that was the correct way. I made some rubber mats for my L2501 HST. They should fit other L series HST models if interested. Easy to install and remove for cleaning.

I am looking for mats for my Kubota L3400HST and unable to find them from any usual sources. Do you make them for this model?

 

[Hawk67]

I am looking for mats for my Kubota L3400HST and unable to find them from any usual sources. Do you make them for this model?

Hey Paul,
I sent you a private message thru this form. I will check and see if I have that style captured in a design.

Thanks,
Ken

 

[Paul Speer]

Hey Paul,
I sent you a private message thru this form. I will check and see if I have that style captured in a design.

Thanks,
Ken

Thank you very much, Ken! Paul