Cab cupholder suggestions?

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,040
3,316
113
Texas
I figured a guy as rich as FLip would have a seat made of un-born lamb’s wool and gold-plated seat belt buckles... in his closed-cab.... and chinchilla-leather in his open-station...

I’m disappointed. May have to change my opinion about him....
 

RichardAaronlx2610

Well-known member

Equipment
Lx2610 Cab, Fel, Backhoe, Grapple, Box Grader, Forks
Aug 3, 2021
441
490
63
New Jersey
I have a L3560 cab tractor.
Having a loader, the right door is pretty much unused. I want to mount cupholder(s) to the bar that runs at an angle that is used to pull the door shut.
Any of you found the perfect match?
Also interested in a phone mount for same tractor. Thinking the same mounting location may be suitable.
Would like to hear your suggestions.
Been studying handlebar mounts on ebay and amazon.
Hoping someone may have previous trial and error to share.
Thanks in advance
37A44238-65EC-4AE1-8B84-E20176089905.jpeg
FB020A76-83DE-4F5D-BBE9-803834003AC2.jpeg
8B61FE8C-01B9-42D8-9343-40074370C906.jpeg
F482E300-A526-4FD7-B389-208D2A1185B3.jpeg
8C1C5137-19DA-4647-AE81-9DEEF4E0F0F8.jpeg
9FFCB572-8208-4759-BB90-4346FFCCE256.jpeg
55147993-51F7-45D0-9F69-52E4F6D39C04.jpeg
 

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
2,994
2,036
113
Edgewood, New Mexico
I tried that Flip, and usually it works just fine as I can’t hear it “ring” over the tractor noise but I can feel it “vibrate”. The problem I’ve run into is bending/twisting around I’ve had it work it’s way out of my pocket and fall. Fortunately it’s not been run-over (yet) and sometimes I’ve been known to wear a T-shirt with no pockets.

Of course, I’d have to come up with a new excuse to tell the wife as to why I need another new Crown-Royal bag.... ;)
I have a solution. I stream a radio station to my Bluetooth headphones from my phone. I keep the phone in a nylon phone pouch attached to my seat back. I don’t need to access the phone to answer and talk . I can do that from my headphones. The headphone set I use is called 3M work tunes.

 
  • Like
Reactions: 1 user

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
2,994
2,036
113
Edgewood, New Mexico
I see yet another ratty seat. Kubota vinyl seats just don't hold up very well. I dislike vinyl seats anyway, makes your arse sweat. I'm a Cordura or cloth seat person 100%. I don't care for a sweaty butt.
I bought a cordura seat cover for my seat from Durafit. $45
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,040
3,316
113
Texas
I have a solution. I stream a radio station to my Bluetooth headphones from my phone. I keep the phone in a nylon phone pouch attached to my seat back. I don’t need to access the phone to answer and talk . I can do that from my headphones. The headphone set I use is called 3M work tunes.

Fascinating idea… I already own a 3M Work Tunes and had no idea it had a microphone. I’ll look into that. Thx for the idea.
 
  • Like
Reactions: 1 user

troverman

Well-known member

Equipment
MX6000 HSTC; 2020 Kubota Z421KW-54 zero turn mower
Jun 9, 2015
1,188
275
83
NH
Fascinating idea… I already own a 3M Work Tunes and had no idea it had a microphone. I’ll look into that. Thx for the idea.
Not all WorkTunes do - only the newer models. I purchased my WorkTunes probably in 2016 or 2017, Bluetooth and radio...no mic.
I prefer IsoTunes as an aside.
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,040
3,316
113
Texas
Not all WorkTunes do - only the newer models. I purchased my WorkTunes probably in 2016 or 2017, Bluetooth and radio...no mic.
I prefer IsoTunes as an aside.
That ‘splains it…. I bought mine in 2014…from Northern Tool in the DFW area… it was on-sale (or mistakenly mis-priced) …normally $70~…. priced $15 so I couldn’t resist. I rarely use it….but this thread reminds me I should….even if only for hearing protection.
 

troverman

Well-known member

Equipment
MX6000 HSTC; 2020 Kubota Z421KW-54 zero turn mower
Jun 9, 2015
1,188
275
83
NH
That ‘splains it…. I bought mine in 2014…from Northern Tool in the DFW area… it was on-sale (or mistakenly mis-priced) …normally $70~…. priced $15 so I couldn’t resist. I rarely use it….but this thread reminds me I should….even if only for hearing protection.
It is worth wearing the hearing protection if you're going to be operating for a long time, especially running an implement that is PTO driven at high throttle.

The 3M product is good but has flaws. One thing is your music volume gradually turns down on you against your will, and 3M notes this is to keep your hearing at OSHA-approved levels. After so much time, you 'aren't allowed' to hear music at a set amount of decibels. That annoys me. Another flaw is the material on the ear cups will gradually crack and break down with repeated exposure to sweat and/or rain. As someone who works outside swinging a trimmer in the hot sun for quite awhile on end, mine got both frequently sweaty and wet. They did last a few years before gradually falling apart. Also, the ear cup adjuster rods often break the plastic they adjust in, and even when new don't provide a lot of tension holding these things on your head.

The IsoTunes version addresses all these things, but the 3M has better, more intuitive controls and the battery life is better. Trade-offs, trade-offs.
 

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
2,994
2,036
113
Edgewood, New Mexico
That ‘splains it…. I bought mine in 2014…from Northern Tool in the DFW area… it was on-sale (or mistakenly mis-priced) …normally $70~…. priced $15 so I couldn’t resist. I rarely use it….but this thread reminds me I should….even if only for hearing protection.
When I’m mowing or plowing snow for hours, the headphones and music are nice. If I get a phone call, I can press the button on the headphone to answer and they have built in microphones. Mine are very clear sound and work well.
 

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
2,994
2,036
113
Edgewood, New Mexico
It is worth wearing the hearing protection if you're going to be operating for a long time, especially running an implement that is PTO driven at high throttle.

The 3M product is good but has flaws. One thing is your music volume gradually turns down on you against your will, and 3M notes this is to keep your hearing at OSHA-approved levels. After so much time, you 'aren't allowed' to hear music at a set amount of decibels. That annoys me. Another flaw is the material on the ear cups will gradually crack and break down with repeated exposure to sweat and/or rain. As someone who works outside swinging a trimmer in the hot sun for quite awhile on end, mine got both frequently sweaty and wet. They did last a few years before gradually falling apart. Also, the ear cup adjuster rods often break the plastic they adjust in, and even when new don't provide a lot of tension holding these things on your head.

The IsoTunes version addresses all these things, but the 3M has better, more intuitive controls and the battery life is better. Trade-offs, trade-offs.
So far, my 3M work tunes have been holding up well. Maybe the newer version I have has been improved? The battery life is phenomenal.