Bx2660 snowblower size

Bearcatrp

Well-known member

Equipment
BX1880 with loader, mower and 3 point
Mar 28, 2023
1,003
634
113
Minnesota
You want a minimum of width of your tractor. 3 point or front blower? Just bought a rear 3 point myself. My 1880 is 4 feet wide. My blower is 51 inches wide. Think these are made a few inches wider that the tractor it would normally go on. If you’re going larger, have to consider the weight. Am using a quick attach so my blower stick out back pretty good. So consider maneuverability of the blower too.
 
  • Like
Reactions: 1 user

Bee-Positive

Well-known member

Equipment
BX1880, FEL, Tooth Bar, MMM, QH, Ballast Box
Nov 16, 2022
438
422
63
Amsterdam, NY
You can find the manual on https://kubotabooks.com/homepage/
Page G-46 & G-47 has the limitations for your BX.

It doesn't have a rear blower listed but I'd stick with 350 lbs. max front or back. If you're using a rear quick hitch you will want to subtract that weight from the total. For example: 350 total - 50 QH = 300 blower weight. As Bear said above a 51" width or there about fits pretty nice for the BX.

Note: the weight for the rear mount mower and disk harrow is less because they stick out farther and put more leverage on the 3 pt. like a long crow bar prying up and down. That's my opinion anyways.

BX2660.png
 

Blue2Orange

Active member

Equipment
BX2380 with LA344S & QH05. SB1051. SG0554. BB1248. RB0560, Vassar dirt bucket
Apr 3, 2025
193
112
43
Bayview Township
Also consider the pto hp spec of you snowblower. The SB1051(51" LandPride) notes tractor HP of a minimum of 18hp. The Traded down to the BX2380 this last Spring. The PTO is rated at ~18hp. Gross hp I think is ~23hp. Sure hope the 18 pto hp will be able to handle box deep medium moist snowfall.