BX25 Won't Start/Crank

willied

New member
May 18, 2019
2
0
0
Columbus, GA
My dad has a BX25 that won't crank at all, the hour meter isn't on, and the RPM and fuel gauges are in the middle on each. The battery is showing 12.9 volts and the battery terminal connectors are new. The fuses in the fuse box are all fine. Any idea what could be causing this?
 

OLD GAR

Member

Equipment
MF210, FORD 8N, BIG TEX CH18,
Aug 3, 2015
69
5
8
ZWOLLE
Can you turn the engine over by any hand method? It is possible you may have a "liquid lock" and even though that is a remote possibility, an engine won't turn over if that is a cause.
 

willied

New member
May 18, 2019
2
0
0
Columbus, GA
Can you turn the engine over by any hand method? It is possible you may have a "liquid lock" and even though that is a remote possibility, an engine won't turn over if that is a cause.
I don't think it's that because literally nothing electric works (lights don't turn on, hour meter isn't on, and it doesn't make a single noise when the key is turned). Are there any fuses other than the ones in the fuse box?
 

Dave_eng

Well-known member
Lifetime Member

Equipment
M7040, Nuffield 465
Oct 6, 2012
5,235
1,018
113
Williamstown Ontario Canada
I don't think it's that because literally nothing electric works (lights don't turn on, hour meter isn't on, and it doesn't make a single noise when the key is turned). Are there any fuses other than the ones in the fuse box?
The wiring diagram shows a 50 amp slow blow fuse. Near the battery in line with a heavy red wire is my best guess as to location.

Dave
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,746
2,551
113
Bedford - VA
The wiring diagram shows a 50 amp slow blow fuse. Near the battery in line with a heavy red wire is my best guess as to location.

Dave
exactly what might thought was ^^^^^^^^^^^^^^^^^
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,224
6,387
113
Sandpoint, ID
Could be as simple as a bad ground connection or even a bad positive connection. ;)