B7500 Tractor aprox.20 yr old

[scottc]

When I jack the tractor up, I can grab the back tires and wiggle the tire and rim back and forth. Is this normal ? They don't seem to wabble when driving.

Thanks to anyone who might know

 

[#40Fan]

Is back and forth in and out as in pushing the tire towards the tractor and pulling it away? Or are saying that you can roll the tire forward and backwards as in driving the tractor forward/backwards?

 

[chim]

Does it make noises while driving? You should be able to see / feel the movement. Mine had loose bolts where the hub fastened to the axle. They were tapered bolts that made the hub tight on the hex axle.

 

[scottc]

Is back and forth in and out as in pushing the tire towards the tractor and pulling it away? Or are saying that you can roll the tire forward and backwards as in driving the tractor forward/backwards?

back and forth not forward and back thanks

 

[scottc]

Does it make noises while driving? You should be able to see / feel the movement. Mine had loose bolts where the hub fastened to the axle. They were tapered bolts that made the hub tight on the hex axle.

no noise. maybe it's the same bolts you're talking about.

 

[scottc]

no noise. maybe it's the same bolts you're talking about.

I replaced the pin hub on the wheel assembly hub but didn't fix

 

[Henro]

I don’t know but it sounds like you mean that when you pull and push on the tire that the tire/wheel moves in and out. It sounds like this happens on both sides.

I think it would be helpful to get good answers if you are more specific in your description. For example if it is in and out movement, how much movement is there? Is the axle moving along with the tire/wheel, or is the axel stationary and the wheel moving with respect to the axle? How much is the movement? 1/16“ or 1/2” ?

Do both sides of the tire move in the same direction, or does the tire/wheel twist rather than going in and out?

Any exact details that you give will get you better answers…

 

[scottc]

I don’t know but it sounds like you mean that when you pull and push on the tire that the tire/wheel moves in and out. It sounds like this happens on both sides.

I think it would be helpful to get good answers if you are more specific in your description. For example if it is in and out movement, how much movement is there? Is the axle moving along with the tire/wheel, or is the axel stationary and the wheel moving with respect to the axle? How much is the movement? 1/16“ or 1/2” ?

Do both sides of the tire move in the same direction, or does the tire/wheel twist rather than going in and out?

Any exact details that you give will get you better answers…

Thank you for your help! Axle does not move. I can grab the tire when jacked up and rock the tire back and forth about 1/2 " Doesn't move in and out on the axle. the hub pin stops it from doing that.

 

[North Idaho Wolfman]

When you put the new hub on it, did you tighten it to the axle?