TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
B7200 not starting
- Thread starter keljan11
- Start date
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
wow, battery-fuse-switch-switch -starter.....even I can figure it out
but really.. WHERE"S THE COMPUTER !!!!
my guess is that since the glowplugs light up, the neutral safety switch is bad,or it's wiring.
but really.. WHERE"S THE COMPUTER !!!!
my guess is that since the glowplugs light up, the neutral safety switch is bad,or it's wiring.
It really is, and makes you appreciate its simplicity after wrenching on something made within the last decade!About aa simple as it gets.
Dan
Hey all, sorry that I haven't been back here to reply to any of your suggestions.
Just had a very good friend pass away, and the weather has really warmed up (+5C), with rain. The need to work on getting the tractor going is not high on the priority list at the moment.
Thank you for all the suggestions and help given. I will be back to say what caused the no-start was, and what I did that worked.
Just had a very good friend pass away, and the weather has really warmed up (+5C), with rain. The need to work on getting the tractor going is not high on the priority list at the moment.
Thank you for all the suggestions and help given. I will be back to say what caused the no-start was, and what I did that worked.
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Actually, I'm a retired construction Steam Fitter/Pipefitter, (in the trade 40+ yrs) lol