Question before I get my hopes up too high. I'm currently running a B2782B 63" front mount snow blower on my B2650. My current snow blower is unsettlingly worn out. There's a BX2750D for sale in my area that looks to be in better shape for a really good price. does anyone know if the female hitch on the BX2750D would match up with the male end of the B2714C subframe? the pictures appear to be close, but I figured id come here to see if anyone else has had any experience with running a BX series blower on that subframe or if they're universal at all. Thanks!
B2714C SnowBlower Compatibility
- Thread starter northermi2650
- Start date
If your B2782B is worn out,you will will not be happy with a lesser quality blower that you are asking about!
Witch most likely won't work for you without much money spent.
Good Luck!
Witch most likely won't work for you without much money spent.
Good Luck!
What is explicitly worn out on your snowblower? I know this isn't the time to start rebuilding snowblowers unless there is no other choice, but when spring comes, price out the parts to repair your current blower. If you need a new case, they are expensive, but compared to the cost of a new blower, it might be a good alternative. As an example, you can make a BX2750 snowblower into a BX2816 snowblower by changing out the hitch and the drive on the rear of the blower. I learned this when a local person had a worn-out BX2750 blower and purchased a used BX2816 and swapped the two parts. I bought the old BX2750 for spare parts for my BX2750 blower. I sold that tractor, and I still have the parts from that blower. The only thing that was wrong with it was that the case had rusted out. Snowblowers are not particularly difficult to work on if you have patience and warm weather.