B26TL stalls under load

[M1ke]

My Kubota B26TL has 242 hours; it starts & throttles up & down but stalls when I try to move forward or reverse. I replaced air filter, fuel filter; have pressure from fuel pump mounted on engine block; no apparent water in fuel; I bled air from injectors & each cylinder is firing. I'm in a remote area and not easy to transport to dealer. Any other suggestions to get me going?

 

[85Hokie]

My Kubota B26TL has 242 hours; it starts & throttles up & down but stalls when I try to move forward or reverse. I replaced air filter, fuel filter; have pressure from fuel pump mounted on engine block; no apparent water in fuel; I bled air from injectors & each cylinder is firing. I'm in a remote area and not easy to transport to dealer. Any other suggestions to get me going?

Any way the brake pedal is locked? Is it HST or gear driven?

 

[M1ke]

HST. Free wheeling - no brake lock-up. It rolls freely in neutral

 

[85Hokie]

HST. Free wheeling - no brake lock-up. It rolls freely in neutral

DO all the other hydraulic "things" work as they should? bucket? MMM ?
did you replace hydra filter? fluid at right level?

 

[M1ke]

All hydraulics work fine.

 

[dmanlyr]

Operator presence switch on the seat bad? That would cause it to shutoff when activating the HST pedal.

David