I believe something is telling it the deck mower isn’t totally disengaged. But the lever is all the way back. Ive had this problem before and was able to tap on the linkage and get it to start. No luck this time though. Any help will be appreciated.
B2650 Won’t Start
- Thread starter Red Kubota
- Start date
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Red,
welcome to the forum - lots of great folks here to help
Now lets redefine the "won't start"
Does it "click?"
Does it turn over and no fire?
Does it do absolutely nothing at all?
IF the latter is true - I would look very carefully at that switch - bypass it, did that work? IF so - you might have a bad switch, check HOW the switch is being pushed on and maybe the answer is there.
welcome to the forum - lots of great folks here to help
Now lets redefine the "won't start"
Does it "click?"
Does it turn over and no fire?
Does it do absolutely nothing at all?
IF the latter is true - I would look very carefully at that switch - bypass it, did that work? IF so - you might have a bad switch, check HOW the switch is being pushed on and maybe the answer is there.
It does nothing when I turn the key. I can jump the solenoid and get it to turn over but it doesn’t fire. I’m not sure where the switch is located.
I think this should be the location of the switch. I would look to check it out.
In addition to KubotaCool’s WSM picture above these extra photos should help you current and future troubleshooting. Unfortunately my WSM is older and lacks the color pictures.
