B2601 quit

johncrumbie

New member

Equipment
B2601
Jun 26, 2020
8
1
3
Covington, GA
Used my B2601 today for several hours nonstop. Mowing with MMM. Finished and got off to let it idle to cool down as I usually do. PTO off. Was idling, flipped seat forward and it shuts off immediately. No response from ignition switch other than glow plug light.
Battery has good voltage, checked fuses. Checked seat safety switches as well as I could. PTO still off. Tried everything in neutral.
Will try and recharge battery tonight though it shows 12.5 volts.
Any ideas as to what I'm overlooking.
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,133
5,191
113
Chenango County, NY
I have a BX, but it takes just a little bit of movement in the PTO lever to prevent a start.

It’s also not a bad idea to rock your HST pedal to make sure something isn’t a little wonky there.
 

Jchonline

Well-known member
Lifetime Member

Equipment
Kubota L6060, KX040-4, M7060, RTV X1100C, M62 (sold)
Oct 28, 2018
1,389
602
113
Red Feather Lakes, CO
So if you dont touch the seat it idles fine, but if you flip the seat it shuts off?
 

Tire Biter

Active member

Equipment
B 2601 434 loader MMM, bunch of tractor stuff . Ford 4600
Jul 10, 2012
237
87
28
S.E. TN
No doubt the PTO or HST switch is causing this.
 
  • Like
Reactions: 1 users

Dave16

New member

Equipment
B2601
Dec 17, 2023
14
3
3
Follansbee, WV
Used my B2601 today for several hours nonstop. Mowing with MMM. Finished and got off to let it idle to cool down as I usually do. PTO off. Was idling, flipped seat forward and it shuts off immediately. No response from ignition switch other than glow plug light.
Battery has good voltage, checked fuses. Checked seat safety switches as well as I could. PTO still off. Tried everything in neutral.
Will try and recharge battery tonight though it shows 12.5 volts.
Any ideas as to what I'm overlooking.
Was the issue with your B2601 resolved? Mine is doing the same thing now but it will restart. I've replaced the safety switch on the PTO but still doing it.