What would be the purpose of an auxiliary PTO on the back mounted on the tractor PTO? The hydraulic lines come from the tank to the PTO and back up to the lever controls. Thanks for the help.
Auxiliary PTO
- Thread starter kjrobinson
- Start date
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Sounds like a PTO mounted pump or some strange hydraulic device like a hydraulic motor driven PTO shaft.
Look at internet pictures of both and you can probably figure that out.
Look at internet pictures of both and you can probably figure that out.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I think you're confusing terms or I'm confused??
PTO is the spinning shaft out of the back of the tractor, there is on some models also a MID PTO(center facing forward), and front PTO.
If it's hydraulic Quick disconnects, That is a remote, used for various implement controls.
Or as others have said it might be that you are pointing out a pump mounted to the Rear PTO.
PTO is the spinning shaft out of the back of the tractor, there is on some models also a MID PTO(center facing forward), and front PTO.
If it's hydraulic Quick disconnects, That is a remote, used for various implement controls.
Or as others have said it might be that you are pointing out a pump mounted to the Rear PTO.