9 mil 1911 suggestions

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,042
3,722
113
Wind Gap, PA
Hey folks, I'm looking for suggestions on another range toy in a gov't length single stack 1911 in 9mm. That would be its only purpose (range enjoyment). So far, I've been looking at reviews/videos on the Colt Competion (SS) and a Sig 1911 TACOPS. I think the Sig would be a Series 80 but the Colt would be a series 70. All of my other 1911's are series 70.

For 1911 styled "clones", I have Rock Ultra FS and Ruger SR1911 (lightweight commander) in .45 acp.
Sig, P938 in 9, and GSG 1911-22 ADOP (with fake can) that I absolutely love.

I'm definitely set on another 1911, but, I just want a full sized one in 9mm for the range. If anyone has something that they really like in the 9 mm variant 1911, let me know and I'll put it on my watch list.

Thanks in advance.
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,618
3,447
113
SW Pa
I don't own one but I have shot a couple 1911 in 9mm. They shot well,, I should say they shot better than I can shoot. I carried a 1911 for years but age found me and I found it kept pulling my pants down .. not a pretty sight. SO I went with the Sig it is about the only one I found that has almost the same grip angle as the 1911. But I would not hesitate to carry a 1911 in 9, it would be a pretty neat EDC
 

WFM

Well-known member
Premium Member

Equipment
L3800
Apr 5, 2013
1,360
706
113
Porter Maine
Kimber has always intruded me and built with quality here in the USA . No I don't own one. But will.
If you've ever watched Alaska the last fronter. One of the sons wears a chest holster. I believe its a Kimber 10mm in the bush there in Homer.
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,042
3,722
113
Wind Gap, PA
Skeets- I hear you. They are quite heavy. I do carry the Ruger lightweight commander on occasion when I'm feeling "Frosty". :) It's an aluminum framed commander with a titanium feed ramp...so hollow points are no issue. It weigh's in at about 29 ounces and is a lot of fun to shoot.

WFM- I currently don't have a Kimber but I've shot a few. They're nice shooting pistols and I also believe that they are well made. I just don't care for the looks of them. maybe it was just the bi-tone versions...I know, that's a bit silly. I'm just picky I guess. Yes, I remember seeing one of the kilchers carrying one. I thought that it looked like a Colt Delta Elite to me (that would make it a 10mm). I could be wrong.
 

SidecarFlip

Banned

Equipment
M9000HDCC3, M9000HD, Kubota GS850 Sidekick
Oct 28, 2018
7,197
555
83
USA
Kimber has always intruded me and built with quality here in the USA . No I don't own one. But will.
If you've ever watched Alaska the last fronter. One of the sons wears a chest holster. I believe its a Kimber 10mm in the bush there in Homer.
Have a Kimber Crimson Carry Ultra and a Les Baer, both 45's.
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,244
5,427
113
Chenango County, NY
I’m far from a 1911 expert. I’m left handed, which does cause you to look at their designs, because some aren’t conducive to a lefty.
I got a Springfield Armory XDS a few years ago in .45 as a CCW.
I like it, but made Croatia bothers me. Single stack makes it small.
Not helpful to you dirty, but the XD’s were pretty good a few years ago.
 

WFM

Well-known member
Premium Member

Equipment
L3800
Apr 5, 2013
1,360
706
113
Porter Maine
Have a Kimber Crimson Carry Ultra and a Les Baer, both 45's.
I had watch a segment of Guns and Ammo TV a while back and they visited the Les Baer factory.
A truly fine piece of craftsmanship. They go way beyond whats generally needed for quality. If I remember right the prices started north of $2500. depending on model.
 

Tarmy

Well-known member
Lifetime Member

Equipment
L2800, BH76A, FEL,box scraper
Nov 17, 2009
482
408
63
Lake Almanor, Ca
Look at SA Loaded...lifetime warranty.

i have about 9k through mine...not one issue ever...easy to shoot, nice trigger...

in CA because of our roster they are expensive...in free states they are a deal and usually 2-300 less than here...
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,042
3,722
113
Wind Gap, PA
Can't figure out how to multiquote, so:

RCW: XDS are nice, gave them very careful consideration years ago for CC. Got a P938 instead, and a shield, finally ending up with the SIG P365. The P365 is my go to now....along with a little S&W bodyguard in 380 when I have to go the very minimalist route. I really dislike that thing, but it beats a sharp stick.

WFM; Yes, they are VERY nice. But I'm looking for something in the 1K range. I should have mentioned that in my first post. Sorry.

Tarmy- agreed, the "SA loaded" pistols are sweet looking, but not available in 9mm. I have two others in .45, I just have a hankering for a 9mm in a 1911.

I haven't really checked availability lately, but I think I'm willing to wait for the right one.
 

Poohbear

Active member

Equipment
L3301 HST, LA525, LP shredder, BB1566 box blade, QH10, Worksaver pallet fork
Jul 6, 2018
506
159
43
Gilmer,Tx,United States
Hey folks, I'm looking for suggestions on another range toy in a gov't length single stack 1911 in 9mm. That would be its only purpose (range enjoyment). So far, I've been looking at reviews/videos on the Colt Competion (SS) and a Sig 1911 TACOPS. I think the Sig would be a Series 80 but the Colt would be a series 70. All of my other 1911's are series 70.

For 1911 styled "clones", I have Rock Ultra FS and Ruger SR1911 (lightweight commander) in .45 acp.
Sig, P938 in 9, and GSG 1911-22 ADOP (with fake can) that I absolutely love.

I'm definitely set on another 1911, but, I just want a full sized one in 9mm for the range. If anyone has something that they really like in the 9 mm variant 1911, let me know and I'll put it on my watch list.

Thanks in advance.
Hey folks, I'm looking for suggestions on another range toy in a gov't length single stack 1911 in 9mm. That would be its only purpose (range enjoyment). So far, I've been looking at reviews/videos on the Colt Competion (SS) and a Sig 1911 TACOPS. I think the Sig would be a Series 80 but the Colt would be a series 70. All of my other 1911's are series 70.

For 1911 styled "clones", I have Rock Ultra FS and Ruger SR1911 (lightweight commander) in .45 acp.
Sig, P938 in 9, and GSG 1911-22 ADOP (with fake can) that I absolutely love.

I'm definitely set on another 1911, but, I just want a full sized one in 9mm for the range. If anyone has something that they really like in the 9 mm variant 1911, let me know and I'll put it on my watch list.

Thanks in advance.
I have the Springfield Armory 1911 in 9mm. It was fine tuned by thier gunsmiths thanks to a friend that has a connection there. It shoots way better than I can. Also look at the Wilson Combat 1911's. Our family hideaway in Arkansas is just down the county Rd. from them
 

ipz2222

Active member

Equipment
L235, bx2670
May 30, 2009
1,927
32
38
chickamauga ga usa
I don't own a 1911 but,, of all the firearms I have owned or now own, only 2 have never,, failed to fire, failed to eject or failed to feed. A Sig and my Springfield Armory XD, both in 9 mm.

[/QUOTE]
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,042
3,722
113
Wind Gap, PA
Just saw a deal posted at cabelas/basspro for a Springfield Armory 1911 Range Officer Elite Target (in 9mm) for $760. I'm so tempted...but I'm thinking of holding out for the Colt Competition in SS if they ever come back into stock.

Maybe I have to get them both? :unsure:

My last purchase thru cabelas was a total nightmare. I used my points to get a P365, ordered online and simply had to go to pick up my purchase from the store. It took approx 3.5 hours to finally walk out with it. Even though I didn't pay a cent out of pocket for it, the whole experience was excruciating...
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,042
3,722
113
Wind Gap, PA
Still hunting for that illusive FS 1911 in 9mm. I've only found a couple on gundeals and most are overpriced. I do hope the shortage ends soon. Its looking like I should've jumped on the Cabelas deal.
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,618
3,447
113
SW Pa
I fear as long as things keep going as it is, prices are not going to come back in to the reality zone. Most of the small shops I have been in are gouging the hell out of people for both ammo and firearms. When you find .38's at a buck 10 a round thats BS and you see something you KNOW what it is worth marked up 75% of what it is listed,, well there ya go
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,042
3,722
113
Wind Gap, PA
I fear as long as things keep going as it is, prices are not going to come back in to the reality zone. Most of the small shops I have been in are gouging the hell out of people for both ammo and firearms. When you find .38's at a buck 10 a round thats BS and you see something you KNOW what it is worth marked up 75% of what it is listed,, well there ya go
For sure Skeets. I get "weekend deal" notifications from many suppliers. When I click the link, it says 115 grain fmj 9mm at $.90/round!!! What a deal. hahaha

I got really lucky and snagged a hornady lock n load progressive press 2 months ago. Friends donated lots of reloading supplies, so, I'm good....for now anyway.
 

SidecarFlip

Banned

Equipment
M9000HDCC3, M9000HD, Kubota GS850 Sidekick
Oct 28, 2018
7,197
555
83
USA
Just had my Kimber 45 ACP out this morning and dispatched a rabid racoon with it. Love that Crimson Trace laser grip. Put the dot where you want impact and squeeze lightly.
 

armylifer

Well-known member
Lifetime Member

Equipment
BX1860, FEL, RCK54P MMM, BB1548 Box Scraper, Quick Hitch, Piranha Bar, BX6315
Mar 26, 2013
2,061
787
113
Thurston County, WA
I speak with extensive experience about the Kimber 1911's in 45 ACP. Kimber makes a very accurate pistol and one of the most reliable pistols that I have ever shot. I can highly recommend a Kimber in 45 ACP. I have shot one 9MM made by Kimber that was the Micro 9 mm if I remember correctly. It would often jam because of muzzle flip when shot by people with large hands that could not get a proper grip. There was nothing wrong with the action, it was just the inability of the shooter with large hands to get a proper grip on that small of a pistol.