3 point hitch

[Dodger]

Looking to purchase a used three point hitch for my L3650
Anyone know what length lift arms I need and size ? Thank you

 

[Roadworthy]

Do you seek the lift arms for the three point or do you need a drawbar? Perhaps you want both?

 

[Dodger]

Do you seek the lift arms for the three point or do you need a drawbar? Perhaps you want both?

yes need everything, lift arms, lift arm adjusters, top link and stabilizers just like the pic attached, a few for sale locally but I would like to know what length the lift arms I need

 

[Dodger]

ok specs for L3650 showing Cat 1 hitch so that would be 7/8" pin size for lift arms , anyone know the length I would need pin to pin ??

 

[wendol]

Might help if you could locate a tractor (neighbor, dealer, etc) to use for measuring purposes.
Apparently the L3650 shares the same set up as that used on the L4200 according to Messick's:

Kubota #35080-71310 COMP LINK,LOWER

COMP LINK,LOWER

www.messicks.com

 

[Dodger]

found this one for sale locally, anyone know what the lever at the end of the lift arm is for ?

 

[Grandad4]

found this one for sale locally, anyone know what the lever at the end of the lift arm is for ?

Those are "telescoping arms". You release the lever and the ends slide out 3 or 4 inches to make it easier to pin the attachment without getting the holes exactly lined up when backing up to the attachment. There's a slot you lift the extension out of - once you have the pins in place, just back up a few inches and it clicks back into place. Probably from a later model L series and unless your rear tires are not the same size as newer L's, I would guess it likely fits your L3650 also.

 

[Dodger]

Those are "telescoping arms". You release the lever and the ends slide out 3 or 4 inches to make it easier to pin the attachment without getting the holes exactly lined up when backing up to the attachment. There's a slot you lift the extension out of - once you have the pins in place, just back up a few inches and it clicks back into place. Probably from a later model L series and unless your rear tires are not the same size as newer L's, I would guess it likely fits your L3650 also.

Thanks very much , I ended up purchasing it .