2022 LX3310 seat adjustment

[waterwalker]

Does anyone know how this seat is supposed to a be cushion ride. I've played with all the adjustments and absolutely nada!

 

[MOOTS]

Should be a T handle on the back to adjust the spring tension, on ROPS without backhoe.

 

[nbryan]

Cab or ROPS model? ROPS 2-way reversible seat for backhoe work?

 

[waterwalker]

Rops model with T=handle at the rear of seat frame and round knob in front!

 

[nbryan]

Rops model with T=handle at the rear of seat frame and round knob in front!

Reversible seat for backhoe usage?
That's what I've got, not much cush in the cushion for sure, and the rear handle releases the seat so it can spin to face backwards for backhoe operation.

It has no round knob on front of seat, but there's a round (disc shaped) knob below it that's for adjusting the 3-point hydraulics lowering rate.

 

[waterwalker]

it is not a reversible seat. You are correct on the round knob in front....my bad!

 

[waterwalker]

So I've loosen up that t-handle, and nada again! Looks like the pivot points are frozen in place. Anyone have an idea on how to break these free?

 

[jimh406]

So I've loosen up that t-handle, and nada again! Looks like the pivot points are frozen in place. Anyone have an idea on how to break these free?

The seat won't pivot forward?

Fwiw, mine isn't very comfortable. I've heard of putting a lighter spring inside the stock one or using an air shim under the seat. I haven't tried either.

 

[waterwalker]

not the pivot...the suspension seat wont go up or down!

 

[Orange1forme]

The front round knob, located calf high between your legs as you are sitting in the seat, is for the 3PT hydraulic adjustment.

There is a seat forward/backwards lever, under the seat on the right of mine.

There is another lever that you lift and place in notches, in the middle/left under the seat. This is the "bounce" adjustment.