2015L3200 Tie Rod Ends, Which One?

[Stitchit1]

I had replaced the tie rod ends on my 2015 L3200 HST about 2 years ago. All was fine. Broke one a week ago. Local Kubota Parts Person tells me I need this one on the left side as in picture. However, I have it on the opposite side already. Does it matter? I know one side should have the solid tie rod. Other than the fact they would both be adjustable, is there any reason to “not” use this type on both sides? Also, when adjusting for toe, I cant find a single thing on this unit as far as a shop manual. Any advice or help would be greatly appreciated! Thank you!!

 

[Fordtech86]

Same tractor as you,adjustable on both sides on mine.


Sent from my iPhone using Tapatalk

 

[Stitchit1]

So it may be that my dealer isn’t looking at the correct model.

 

[Dave_eng]

The L3200 WSM only shows an adjustable tie rod on one side.

Want a copy, send me a PM with your email

Dave

 

[North Idaho Wolfman]

Yea it sounds like they are looking at the wrong model.
If you need part number just ask.

 

[Jblac197]

I had replaced the tie rod ends on my 2015 L3200 HST about 2 years ago. All was fine. Broke one a week ago. Local Kubota Parts Person tells me I need this one on the left side as in picture. However, I have it on the opposite side already. Does it matter? I know one side should have the solid tie rod. Other than the fact they would both be adjustable, is there any reason to “not” use this type on both sides? Also, when adjusting for toe, I cant find a single thing on this unit as far as a shop manual. Any advice or help would be greatly appreciated! Thank you!!

Go on messicks.com and order a WSM shop manual. They're not cheap. I just ordered one for my l3800, was around 100 bucks. The l3200/l3800 are the same tractor with just a few hp difference

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[D2Cat]

I think in post #4 Dave offered a WSM, if I read correctly! Probably be less than $100.

 

[North Idaho Wolfman]

Go on messicks.com and order a WSM shop manual. They're not cheap. I just ordered one for my l3800, was around 100 bucks. The l3200/l3800 are the same tractor with just a few hp difference.

Or Kubotabooks.com and get it for free.

 

[North Idaho Wolfman]

The L3200 WSM only shows an adjustable tie rod on one side.

Want a copy, send me a PM with your email

Dave

Dave just for your FYI:
The mechanical and structural part of the WSM's are sometimes just general pictures, and not exact pictures of the exact model, so be careful there.