2 questions - anti galling compound for SS and winch ??'s

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,878
2,292
113
central ct
I have some stainless steel hardware going on my tower project. What is the consensus for a good anti galling compound? I sure don't need much and generally wouldn't use SS.

I am considering putting a winch on the tractor but have a couple of questions that have no obvious answers, at least to me.
Power? Do you add a second battery? With the current draw of a 1-1/2 or 2 hp winch the alternator sure isn't going to keep up and that battery in my tractor isn't exactly large.

Where to mount? Permanent or removeable? Is it worthwhile to get a blank quick attach and leave it on there? Other suggestion, the 3 point perhaps?

Appreciate the feedback
 

armylifer

Well-known member
Lifetime Member

Equipment
BX1860, FEL, RCK54P MMM, BB1548 Box Scraper, Quick Hitch, Piranha Bar, BX6315
Mar 26, 2013
2,043
781
113
Thurston County, WA
You need a battery that can keep up with the load. I would definitely get a second battery or at least a higher capacity deep cycle battery. If you are considering a blank quick attach and using the winch on the loader arms, you stand a very good chance of damaging your loader arms. Fabricating a removable mount on the tractor frame is your safest bet. If a removable frame mount is not possible, maybe a mount that can attach to your 3 point as long as you can keep the winch below the axle when using it. Absent all that, a permanent mount to the frame is the only other option I would consider.
 
  • Like
Reactions: 1 user

Sporto

Member

Equipment
B2601-1, FDR1660, RTA1258, BB1560, LR1672, PFL1242, MK Martin Snow Blower
Mar 20, 2021
57
51
18
Manitoba Canada
As far as anti galling compound the answer is yes you should use it. I worked in a power generating station and the main bus connections used SS hardware and boy if the last tech didn't use the compound he was awarded with some very choice comments. If you never plan on taking the hardware apart no you don't need it.
 
  • Like
Reactions: 1 users

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,878
2,292
113
central ct
Thank you! I never considered a frame mount. I'll look to see what's involved there. Two batteries make sense - separated by diodes. The alternator can charge both but the 2nd will only power the winch.

Thanks!
 

JasonW

Active member
Jan 29, 2015
295
137
43
Al
I mounted a 5k lb winch on my L3800 in/on the factory brush guard. No issues with the stock battery. Had it on there for about 9 years before selling the tractor.
I used it for self recovery, either myself or someone else. Probably used it several times each year.
Some on here mention a winch for skidding logs, which is definitely a different level of winch needed, both speed and duty cycle.
 
  • Like
Reactions: 1 user

InTheWoods

Active member
Premium Member

Equipment
B7510/FEL, B7100D, ZD18, ASK-R130
Nov 17, 2023
135
75
28
Indiana
...I am considering putting a winch on the tractor...
What's the intended use - getting a stuck tractor unstuck once in a while, or an afternoon of pulling big logs out of the woods?
 

Runs With Scissors

Well-known member

Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
Jan 25, 2023
2,417
2,777
113
Michigan
I have a "lifetime supply" of the Permatex brand as well.

Hahahah....if I walk by it, even when it's on the shelf, it will automagically get "spread everywhere".

Works good though......


I would "2nd" the "frame mount" idea as well.

I'm thinking of a mounting system that will work with the existing "rear draw bar mount" as well as a "homemade front mount" so it can be used in both front and rear positions.

Factor in a long/big enough cord to go from front to back as well.
 
  • Like
Reactions: 1 user

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,397
4,897
113
Greensville,Ontario,Canada
re: winch
yes, put on removable mount
have both rear and front mounting options. I've retrieved too many 'weekend offroaders' that found out their $$$,fancy FRONT mounted winches were USELESS in getting them out.
For sure ,2nd battery, and a double diode for charging.
 
  • Like
Reactions: 1 user

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
I have a "lifetime supply" of the Permatex brand as well.

Hahahah....if I walk by it, even when it's on the shelf, it will automagically get "spread everywhere".

Works good though......


I would "2nd" the "frame mount" idea as well.

I'm thinking of a mounting system that will work with the existing "rear draw bar mount" as well as a "homemade front mount" so it can be used in both front and rear positions.

Factor in a long/big enough cord to go from front to back as well.
Even when it's on the shelf, It will automagically get "spread everywhere"
SO TRUE ! :ROFLMAO:
 
  • Like
Reactions: 1 user

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,878
2,292
113
central ct
What's the intended use - getting a stuck tractor unstuck once in a while, or an afternoon of pulling big logs out of the woods?
My initial uses would be for putting some 'pull' on trees that I want to take down and be sure they fall in the right direction. I also have some use for a winch in my tower project - raising and lowering items to the top of the tower. A winch would be a lot more convenient than moving the tractor.
 

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
re: winch
yes, put on removable mount
have both rear and front mounting options. I've retrieved too many 'weekend offroaders' that found out their $$$,fancy FRONT mounted winches were USELESS in getting them out.
For sure ,2nd battery, and a double diode for charging.
Front mount will work just fine, with a long cable, and a rear mounted cable roller.
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,397
4,897
113
Greensville,Ontario,Canada
hmm, obviously you've never seen the 'weekend offroaders' from around here....
they'd rather call tow truck than get out of their rides and wade through 3' of mud ! Ain't no way they'd know HOW to fish cable under and out the back.....
ewwwww..... get mud under my nails !!!!
THAT kind of crowd !!