Search results

I didn't a while back... The center middle nut is the difficult one... Read these.. www.orangetractortalks.com/forums/showthread.php?t=6816 www.orangetractortalks.com/forums/showthread.php?t=3934&highlight=dynamo

Mine doesn't boil at all even at 109 outside.. I think you need flush the system and maybe replace the radiator.. The caps are cheap.. Replace it...

Well it’s all done… I took my new 10mm ratcheting ring spanner and super glued the nut into it… I took a little screw driver to push against it, this gave me one click at a time… In about two minutes I was done… I wiggled the ring spanner around and it popped off. Thanks everyone for all the help…

Oz Chris, It’s very difficult to tell exactly where that nut is with everything around it…. This is only a guess… 13”1/2 - 13"3/4 from the beginnig of the frame - down 1”1/2 to 1”3/4….

Here's my little B6100... Maybe this time a little smaller..

I did resize them.... This is right under the oil filter...

Oz chris, Not sure if this is what you are looking for... First time for pictures...

Oz Chris, I take a look tonight...

capsparky111, I tried that yesterday without heat, it broke... I was going to try to buy a bent open end wrench.... Thanks for all the help....

btackett, Do do have an set of ratcheting ring spanners... But they are the first ones out... Very large around the ratcheting ring... Sounds like I need new ones... Thanks for the heads up....

Have a 1978 B6100 and trying to remove the Dynamo. I’m going to repair it but can’t seem to get the last nut underneath off… Can’t even get the 10mm on the nut… I must be missing something, it looks like you must remove the front cover on the engine to get to it… Anyone have any suggestion? Any...