Search results

I actually didn't have any fuel treatment in it prior to this, but didn't think it had been all that cold. Had gotten down in the 20's at night, but was probably 35 the day I noticed the problem.

Today I took the air filter off and made sure I hadn't done something stupid, looked fine. No new noises, steering seems fine, and I had to put the plow on this morning because we got 6 inches of snow I had to clear. No problems with the plow movement. Replaced the fuel filter when I was...

It's at 410 hrs now and was last done by a dealer at around 250. Just a single filter as far as I can see and that's all the service manual indicates. No smoke other than when first starting, which is black, but clears up immediately after. Going to run out and pick up a fuel filter, then...

Hi All, You all have helped me in the past and hoping someone has some wisdom. Did service last weekend, oil/filter, new air filter, front axle drain and re-fill, then drained the hydraulic system completely(finally found all 4 plugs), replaced both the hydraulic and HSD filters, filled it...

Picked up a 4' at Tractor Supply on Friday, the dual trailing wheel model. It's a countyline brand but pretty sure is the Tarter unit. Got it all put together and adjusted and did a small mow yesterday. Cut nicely, went through some 1" pieces or so. Parked it in the driveway and was going to...

Sounds like the 4' is a safer bet. For the amount of cutting I have to do, the extra foot isn't going to save a whole lot of time. Thanks for your reply.

Hello, Have a B2320 and am looking for a rotary cutter to take care of 2 acres of field, some small saplings, etc. Have read varying opinions on whether a 5' unit is appropriate, or whether a 4' is the one for this tractor. It seems based purely on specs that it can handle a 5 but wondered if...

Hello, Have a B2320 for 4 years now. Shortly after I got it, noticed that the hydrostatic drive would stick, ie, if you let off of it, the tractor kept on going and the pedal would gradually come up and the tractor would stop. Tried greasing the assembly, then asked the dealer to check it...