Search results

Mind posting the link for kubota?

Yes messicks is where I got confused so what your saying doesn’t matter the serial number they are all either .20 or .25 over that’s what the machine shop wanted to know so if it need boring they knew what size and the serial numbers and pistons confused me

Thanks for you help anyway I’m hoping to get the correct size pistons the first go round

Would be my luck block is already at the machine shop anyone’s eyes good enough to see the rest of the numbers

In other words from what I see you have to order the pistons according to your serial number any help would be much appreciated

When I look at pistons it says serial numbers for reference but I’m assuming it’s different pistons where do I find the serial number for the engine I need to know what size it needs to be bored too idk if the pistons or 20 or 25 over

Didn’t wanna have an open thread this is what I found when I tore engine down excessive heat maybe !?

Know where I could find a wsm for the d902?

I’m gonna check the push rods is it only a tappet at the bottom?

Moved injector noise didn’t follow still sounds higher on engine near head idk how to rule out that the rocker arm is causing it

I did the old mechanics trick a searched around with a piece of wood and it’s coming from cyl3 but noise is much louder on the head and not the crankcase itself Also did the injector lines and the one for cyl 3 gave off a different noise then 1 and 2 Should I pull injector and move it to...

If it has a rod knock I should be able to hear it just spinning motor over? Or no. Thought about pulling injection pump to check rollers and springs

I did that changed nothing does it matter that rocker arm moves like that? None of the others do

Extra lubricity since the gas would had been extra harsh

Story on tractor was it needed a new motor radiator was leaking etc and it wouldn’t run at all I got it and found what smelled like gas in the tank I changed all filters oil etc and seen no metal in oil filter put some fresh fuel and atf in tank and I think it was gas in the tank why it wouldn’t...

Sorry guys I’m new here trying to post watching my 2year old and 9month old

https://youtube.com/shorts/JBj2M341E4Q?si=_WkkEhl_1ImjXGsc. Second video of the one rocker arm that slides back and forth

https://youtube.com/shorts/Cy2jhwot9PM?si=TROAR-Lw-3t8Y7hF.

Sounds metallic to me but I layed on ground and stood above engine and couldn’t pin point where I thought it was coming from I adjusted valves and exhaust on 3 would slide back and forth the rest would not so idk if that is normal

Cant seem to pin point it sound familiar to anyone? Have a video but dont know how to post it. The noise follows the speed of engine