Search results

  1. C

    DPF Regeneration

    That's what I don't understand, according to the Ok went through every step again after seeing a post with another item that I hadn't tried as of yet!! Eureka it works!! WIGGLE THE STEERING WHEEL,,, Regen light comes on, Beeps twice, RPM increases, on it's own to 2200 rpm and 18 minutes later...
  2. C

    DPF Regeneration

  3. C

    DPF Regeneration

    Things don't work as spelled out in the Owners Manual. Both Regen and Rpm lights are flashing, no beeping set rpm at approx. 2200 and after 30 minute still not working!!
  4. C

    Flail Mower

    Which Flail Mower works best on a L3301Kubota
  5. C

    DPF Assembly

    Is there a specific alignment from the front of the canister to the rear? In other words should there be a line drawn from the front to the rear to assure a certain alignment?
  6. C

    Engine Block Heater Install

    Which Loctite should I use when installing the drive-in adapter bushing for the block heater on an L3301? Block Heater number 70000-00297!!
  7. C

    Fuel de-icer!!

    Should I use any kind of fuel de-icer other than number 2 diesel??
  8. C

    DPF Canister

    Thanks alot, way better than what I had!!
  9. C

    DPF Canister

    Anyone have any info on removing the DPF Canister on a Kubota L3301. A video wood be great!!
  10. C

    Curtis Cab Heater Install

    There isn't a whole with a plug on my tractor just a dimple. Guess if nothing else I could see if I could get someone to drill and tap it for me.
  11. C

    Curtis Cab Heater Install

    Here's a few photos. The bushing on the left with the Red arrow goes in the blue arrow port of the adapter then the temp sending unit screws int there. The Red arrow of the adapter screws into the hole in the engine block where you remove the Temp sending unit. The port on the top is where the...
  12. C

    Curtis Cab Heater Install

    I have a L3301 and the adapter they send with it will not fit in the space above and behind the alternator. They provide a 3/8" street EL and there isn't enough room to tighten it after the adapter is installed. I don't know what thread is on the adapter but it must be something in metric cause...
  13. C

    Curtis Cab Heater Install

  14. C

    Curtis Cab Heater Install

    Anyone had problems with the install procedures of the Tuck Away Heater system on Kubota tractors? Mostly with the adapter system for the heater hose hookup at the thermostat housing??
  15. C

    Water Temp Sensor Plastic Connector

    Ok I'll try that.
  16. C

    Water Temp Sensor Plastic Connector

    How do you remove the plastic connector on the water temp sensor of L3301??
  17. C

    Ignition Switch

    Which wire (color) on the back of the ignition switch is 12 volt hot when the switch is in the on position?? Kubota L3301.
  18. C

    LA525 Quick Attach

    Are there any take-offs or used Quick Attach Buckets and Hitch's available??
  19. C

    Valve Stems

    Actually I saw them right away as I was standing at the back area looking it the PTO shaft and saw them at that time.
  20. C

    Valve Stems

Top Bottom