Search results

  1. E

    Are all pallet forks created equal?

    Plus adjustable with forks and your good for any pallet There are different spacing for the vertical mounts, there are different length fork, different width and thickness for different load capabilities
  2. E

    B7800 will not start

    On my b7800 the seat is not jumpered and if you get off the tractor it will stay running if the break was not on and it move a small amount it will kill the motor. I think you need to check for power and test all the fuses. and like the other fellow says to check for power at the small wire on...
  3. E

    B7500 Knocking

    Sounds 0k to me, Enjoy it.
  4. E

    HST pressure tester?

    KUBOTA JailBreakYourTractor Pressure Boost kit W/Gauge Hydraulic Shims BX +25%! Flat FACE *2017 & UP https://www.amazon.com/dp/B0BBDH4TZP/?coliid=I1EDZT14R0VZZ&colid=EVMDE5SAYW0I&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it
  5. E

    B7800 will not start

    Turn key to on and move pto back and forth then off same with throttle pedal. Try to push switches under seat, may be sticky. Also press clutch pedal up and down. So far that has worked on my B7800. Usually it was me bumping the pto lever.
  6. E

    3point wood chipper

    I have always thought along the lines of taking a gas operating chipper and powerong it with the tractor 3 point.
  7. E

    Tilt control adjustment

    I would be curious if it is binding, might disconnect and see if it moves better.
  8. E

    Oil/fuel leak

    Could choose the most likely leak and add a die that can be identified with UV light
  9. E

    150 gal 3 Point Sprayer

    maybe it needs some priming, I would put some water under pressure into the inlet. I am not familiar with that unit though.
  10. E

    Landscape rake for 3560

    Ignite attachments is were I got mine
  11. E

    L3400 positive battery cable

    Those are the ones I was referring to
  12. E

    L3400 positive battery cable

    those are good alternatives and will work, I should add that I take the old cable and use my hydraulic crimp tool to put a good lug on the old cable with marine grade shrink tube. redid all the cables on my 2500 Dodge ram diesels batteries. and used the military grade hummer terminals. just to...
  13. E

    3 point rakes

    I have one by ignite attachments works fantastic.
  14. E

    BX2370 starting issues

    so true, for a simple test he might just want to put the voltmeter on the batter and watch the voltage as he cranks it over. let us know what the reading goes down to. On the other hand it could be good and have bad connections or cables. good luck
  15. E

    BX2370 starting issues

    Then do a voltage drop on the cables when trying to start.
  16. E

    To Much Hydraulic/Transmission Fluid in a B2650...

    I wouldn't think 1 quart is going to be too much
  17. E

    Ignition switch replacement

    Might want to just tie in a hidden toggle switch into the seat switch. I ordered a couple of keys for my B7800 on Amazon for under $10.
  18. E

    Unknown brand box blade for B2710

    I believe that will be a good choice for your tractor. I had to pay $1000 for a new one because they were asking too much for used ones in my area.
  19. E

    Unknown brand box blade for B2710

    That flap is the cutting edge when it is folded down. Mine folded down pinned in place. How wide is that box. I put a 5.5 foot one on my B7800 like your tractor
  20. E

    2004 B2710 HST doesn't want to move after warm

    I am wondering if you are having a reduced fuel to motor issue. 1st simple check vent in fuel cap. Fuel filter.
Top Bottom