Search results

Hey all, thanks for the help. I ended up using my "problem solver" screwdriver of 18" to reach way back to the teeth at the #060 ring and lifted the teeth back into place. Only a moderate bit of levering needed. Filled the resistor up and everything works great. The PTO selector also moves with...

Hey, thank you for taking the time to find that. The shaft pulled out about that far when I pulled the cover off as the bearing seats in the cover. Now the shaft/bearing won't go back into original place as I'm assuming the gears aren't meshed somewhere down the way.

Not that I know of

After sleeping on this issue I've decided on two different ideas to try and get the mid pto to engage - first is to wrap up the #20 gear in something thick and heavy to protect the teeth, and attach a chain wrench to it to try and forcibly turn the gears while moving the pto selector. The...

Hi all, long time lurker, first time poster. BX2370. My transmission case developed a leak from the seal, so I drained it, opened it up to replace the seal. While removing the cover, #040 ball bearing was firmly set in the cover, and as a result gearshaft #20 has been pulled out slightly. It...