Search results

Progressive Electronics, which is now Tempo and also Greenlee make wire trackers. The model 508 is a hard wire and good to about 24", model 521 is hardwire and inductive good to maybe 36". If you know your wires are deeper then you will need more expensive machines. I also have a Ditch Witch...

Just curious if anyone else is going to the World Ag Expo. I have been going to this ag show for a long time now and have always stopped by the Kubota booth. Everything related to ag is here and I mean everything. Whenever I am looking for new equipment I usually wait for this show, great...

Wow Lenny, that is a fantastic job. How long did it take you to make the bucket and what equipment did you use???? i.e. plasma cutter, lathe, etc

hey Wolfman, about how much are the ceramic flap wheel?

Here is the ceramic grinding disc

Well I finally got my K008 with thumb and 2 buckets. Changing buckets takes a lot of time because of the thumb. So I decided to get a quick attach that is until I saw how much these can cost. So I decided to try and make my own. Ok, now the disclaimer! I am a Landscape contractor, NOT a...

Thanks Kubotasam. I have the 4520b parts and owners. So I call this guy up today asking about the 4520A and he says he just sold it. Wow, I am really striking out this year. 2nd B/H missed so far.

Got a question. I currently own 2 Kubota B7100's with F/L. One has a box scraper and the other has a B/H B/L 4520B. I have an opportunity to buy a B/H B/L 4520A. What are the differences between the 4520A and 4520B. There has to be some difference for Kubota to make 2 different models of...

Thanks Jerr, it was a fun project, good bonding project for father/son. The best part is that we had so much equipment that we never got in each others way or had to wait for the other to get off of a welder, etc. My son wanted to make a Fab4 bumper, we actually think ours is better, heavier...

Just came back from Alaska, thought everyone might enjoy this.

My son asked me to help him build a bumper for his truck. We used a Miller Syncrowave 180, Lincoln 130 mig, Hobart 210 mig, and Thermo Dynamics Cutmaster 52 Plasma to make this bumper. We used 1"x3" flat stock for the main support attached to the truck frame. Shackle holders are also 1"x3"...

Wow, that gives me hope. All I have to do now is find a subframe kit or make my own subframe.

yeah that is what I thought. I have a B7100 with a BL4520b BH, great combination. I have an opportunity to buy a used BL4530, think I will and wait to find a tractor to fit it.

All my battery stuff is DeWalt. Have never replaced anything except batteries. IF you plan on sawing 3" diameter tree roots there is a 12" saw blade just for this. Will cut through roots fairly quickly BUT dirt will dull the blade quickly. But careful that the tree does not settle on the...

Read in prior forums that the Kubota B4530B = Woods BH 750. Has anyone tried mounting this hoe on a Kubota B7100? Or is it too big of hoe for this tractor?

I use a box scraper w/rippers to get my rough grade then switch over to a large ( 8') angle blade to get semi-finished grade, then turn the angle blade 180 degrees to get a finish grade. I have used this method on landscape projects up to 1/2 acre. Of course the larger the area the easier it...

Thanks Wolfman, I've had my tractor for a gazillion years and thought the differential lock also locked the front. I got high center once, only 1 front and 1 rear tire on ground, engaged differential lock and had all 4 turning and got unstuck. So I assumed that front and rear were both locked...

I have no idea what the clanking noise is however it sounds like you broke a gear. The 2-4 wd lever has a detent ball that sometimes gets "frozen" in place making it very hard to go from 2 to 4 wd and vice versa. I use to spray some wd-40 between the level and the transmission case to free the...

Hey Russ, saw this on craigslist: Kubota Parts tractors B6000 and B7100 (Homeland) Kubota Parts tractor, kubota b6000 parts tractor, trans. parts This was a 4 Wheel drive tractor but that front end is already sold . I just got a B7100 for parts to. steering intact 4 wheel drive front end...

Found this on craigslist, bunch of decals for Kubota really cheap. Thought some of you might be interested: http://atlanta.craigslist.org/nat/grd/4930094339.html Kubota decals (Braselton,Ga) We have various Kubota decals that are brand new and still in packaging. They are listed by...