Search results

3rd set ready to paint.

2nd set of mods

hi all, i have been out in the garage again using up some spare steel offcuts to fabriacate a retro fit front protection bar setup for fitment to my B8200. Purchased for a low price a new and unused front protection bar from a much bigger kubota with a view to modify it for fitting to my B8200...

well then, you never know :);) Sharing if fine with me, only problem that i can see is this, a lot of miles inbetween...;) rob

as in the title guys, any ideas on the lifting capability of the BX25 backhoe setup, also biggest digging bucket it can accomadate , any possabilty it would handle a clam grab attachment. rob

Hi all, i'm doing a bit of hydraulic reconfiguring on my B8200 at present with the addition of some extra capacity etc for more equipment to be utilized on the tractor. At present i have an extra hydraulic spool valve assembly connected to the centre connection block as per kubota recommeded...

glad you found one, they are around just need to track them down:) anyway, there will be a small amount of fluid leakage from inside the cylinder when you remove the exsisiting cap, wont be to much but have some rags underneath the cap to soak it up. no gasket required but be sure to check the...

have a read throught this thread, it deals with this situation perfectly. reply number 23 if very applicable to you. http://www.orangetractortalks.com/forums/showthread.php?t=3377&highlight=b7100+tacho Good job Dan... rob

i agree, need piccy's to be able to offer you more guidanceon this. sounds like something is non standard on your machine. If you have the correct guage it should fit without issue and connect up, just because its a 7001 makes no difference in this instance , as if you didnt have a guage...

hi Mark and welcome to OTT, nice to see another user on here from the UK. Anyway, it is more than likely that the short has blown one of the inline fuses behind the instrument panel, the B7100 have several and they can be found in that location. It would be aslo wise to check the wiring looms...

here you go, direct info from kubota so 100% accurate;) If its got a BF300 or 300A which is the correct loader for the 8200 , the loader weights in at 617 lbs . the B8200 weights in at at approx 1,565 lbs for the man version so a bit more for the HST. so looking at 2,182 lbs minimum. for the...

Hi bill, update for you, they are cast steel , so you'll need to fix them accordingly. hope that helps you. rob

welcome Bill, i know the RW25 well, used to have one back in the early 80's, great bit of kit even if the cab is a bit " cosy" , i used to drive it between jobs from site to site. does yours have the 4in1 bucket option , mine did and it was such a improvement over the plain bucket. If memory...

thanks for the reply Wolfman, yes quite a bit of soil and Gravel;) you should know i like nice tidy gravel....:D;) by the way, great username you have.....:cool::) rob

As in the title really, i may be able to pickup a Gannon box grader, looks like a PD42 model. Do any of you guys have one or use one, if so what are your thoughts on it, worth buying or giving miss. anypics would be great also. thanks rob

just to be 100% clear , so there can be no question on this subject. here is the parts manual data. 1 pin , no bushes avail . greese point in pin, shouldered to prevent rotation!

I'm an easy going person, will go out of my way to help anyone, whenever or what ever. If it seems i am being rash about this then albeit, i just get really anoyed sometimes when this happens....maybe its just me, but i dont think i am alone.

on the basis that i had all ready provided jake with all the correct information from the correct manaul that he needed in numeruous emails , along with the option available to him, i was to be honest a little disapointed that he felt the need to disregard the info , only to get the exact...

Actually i'm English ;);):D , one should allway be correct on these things...;):D have a good one wolfman :cool:

just checked exc rates, 4,333.49 GBP is expensive , i'd be looking for it at somewhere around the $5000 mark to be honest for a good example, unless they are throwing in soem decent extras with it.