Search results

I think Kubota tech is right. I was wandering if it was a hyd driven deck but if so it sounds like the lift is taking pressure away from the drive. If the filter and oil level is good I would say it's time to tap into the hyd system and do a pressure check.

I knew that it was different from the rest of them. John Browning really hit a home run when he designed the 1911. My "Baby" that is my prized posession is a Colt 1911 Delta Elite 10mm. I don't shoot it very much. I'm afraid it's going to break the frame. I just bring it out when a 45 owner...

I have been trying to find a GF model Kubota to try and see what you are talking about but I can't find one. The closest thing I can find is a G model mower. What do you have?

What is the pistol on the far left in your pic? I noticed it has much finer sights than all the others.

That wouldn't be a high point for me for sure. That's about how bad my luck is though. :eek:

Hi Kuboman, Throw the problem out there and maybe someone can help you out.

Have you retraced the plumbing to make sure that everything is routed correctly? It almost sounds like it's fighting against itself.

If Eric's luck isn't any better than mine we would probably make the jump fine and then the tractor would fly out of control and stick in the ground like a arrow. He probably would break both arms and recieve third degree burns on his ass and then would expect ipz and myself to rub on the...

In Dalton our Lowes sucks and the Depot is the way to go. Lowes is higher priced on about every thing and you hope like hell that you don't need any help with anything. If you do you better have your running shoes on so you can chase somebody down because they damn sure are running the other way...

Some washers are directional. They may be tapered on one side and not the other or maybe a hollowed out section that would allow it to be tightened up on one side more than the other.

You could put a thin layer of gravel over the roofing if you didn't want to mess with the pallets. I would suggest pug mix or base material depending on where you go is what it may be called. Level it down smooth and it will set up like concrete if it comes from a good supplier.

I agree with Eric. The box scrape would be the best choice in my opinion for all around use. With a little practice you can do about anything that the leveling scraper can do plus you have the ability to moves a lot more volume with the box due to it's deeper sides. A standard or one like Eric...

You might try lifting the bucket just a little and with the engine off barely crack the fittings loose on the rams to see if oil or air comes out. Just be sure to not let anything be around or under the bucket when you do this. Most of the time the hyd system will bleed the air of on it's own...

A friend of mine has a 110 hp NH 4WD and it is one of the nicest tractors that I ever have been in. Hyd shuttle, dual range 16 speed power shift, Tripple remotes, electric over hyd live pto, all digital dash, cd player and a cab big enough to have a party in. It has a few draw backs though...

I know what you mean. The blades listed for my finish mower are $50 cheaper per set than what I paid for the last set I bought. I'll try a set of those the next time I buy any. Thanks for the tip on that Eric.

Ipz2222, I wish you would tell me which bank those checks are going to. I can't even afford to pay attention. :D

That advise should be marked in the OTT hall of fame. It not only will save dollars in the long run but could even be the difference between life and death. Good call on that one Service Dept Vic.

Nice site Eric. Have you ever used any of their mower blades before? Just wondering how they last compaired to the factory stuff.

I just wish that Kubota would use the room that they have available in better ways. Why make the cab a foot wider and cram a control panel up your arss. They need a fat man on their design team that really like to spread out and be comfortable. So what if the tractor ended up with a candy bar...

This may be helpful but to say the least it's interesting. www.youtube.com/watch?v=65vTGLz1kJ8&feature=related