Search results

Sometime ago, our m 9000 had hydraulic fluid pouring out of the transmission vent. The fluid was full of tiny bubbles, the tractor was sucking air. This issue occurred right at startup. Even though the fluid was overflowing, the hydraulics worked fine and the tractor rolled. With the help...

Here is the update on the m9000:. I used a smoke machine on the transmission case starting at the rear. That is how I discovered the other vents. The one on top of case in the back, the one mid tractor right side...I temporarily caped off these points and introduced smoke at each vent. I did...

Our m9000, can, front loader, 2 wheel drive has hydraulic fluid coming out of trans vent. I have posted about this previously and followed the recommendation. Initially, when operating tractor hydraulic fluid poured out vent. The fluid was saturated with air bubbles. What has been done? The...

This is an ongoing problem with our m9000. I have received very helpful information. After running the tractor around fluid starts coming out of vent on top of transmission. The fluid is full of bubbles, which I learned on this forum indicates air is being sucked in to system. I have pulled...

It took some time but eventually removed the suction tube, couple of times, and replaced all the orings. Verified the filters were not double gasketed and brazed a hole rubbed in tube. Alas, the problem of fluid coming out of vent persists. I am going to power wash the area under the tractor...

The problem was occurring prior to filter /oil change.

The m9000 hydraulic fluid vent leak. The fluid is definitely full of bubbles, near foaming. I started tractor, operated front loader and 3 point. They work normal. Backed up and pulled forward, fluid started coming out vent. Definitely lots of tiny bubbles. All the things you have...

My report on m 9000 vent leak. Drained old fluid, installed 2 new filters and refilled with new fluid to proper level. Started tractor, backed up, operated 3 point and front loader. Fluid coming out of vent immediately. Tractor running less than 5 minutes. Where do I go from here?

M9000 front loader, manual transmission, started leaking hydraulic fluid from vent tube on top of transmission. I was moving hay bales, front and on 3 point when I noticed the severe leak. The fluid seems thinned out. I shut down and let machine cool off. I checked hydraulic level on level...

Thank you for the things to look at and insight on turbos. As far as shutdown, after working out in the field, it is a leisure 10-15 minute drive to the equipment shed. Pull in and idle for half a minute then turn off.

Our m9540d is running normal. Recently, I have noticed when I shut tractor off, I hear what sounds like a fan spinning down when you take power away. I have isolated it to the area of the turbo. This is a new sound and there is no apparent new noise when running tractor. Shut it off and you...

Now with literally freezing temperatures, putting the glass doors back on tractor has become a priority. I'm going to put the hinges, pull bar and latch with new rubber. I've been told horror stories about the glass shattering so I'm looking for advice or tips to get these doors assembled and...

That's a relief...thanks for the info on the seal. Monday is going to be a busy day.

Our m 9000 has developed an oil leak from the front crankshaft seal. It's pretty steady. Can anybody tell me if that seal can be replaced without removing front cover? I'm going to need a repair manual to do this job. Any recommendations? I'm unsure about these various online manuals...

LOL. It just comes right out:). Thank you!

There are 3 bolts holding plate and 3 gears? That's the sun gear..? I just slide off as unit?

I recently posted about a no start skid steer svl95-2s. Now we need to get it off jobsite and to dealer. Can this tracked vehicle be rolled when disabled...some way to disengage drive sprocket without disassembly?

Found that this machine has an error code of 9214, excessive then cycled or something like that. Is this a code that would prevent starting. I've worked in automotive repair industry but not with diesels or tractors. I'm seeing the computer management is more restrictive.

Air filters are clean, fuel flow filled up the separator bowl and filter. Fuel comes out of fitting on top of fuel filter mount. The DEF pump is pumping...where else should I check? Is it possible to bleed air at the injectors or pump?

2016 SVL 95-2s skid steer cranks but no start. Was running then quit. We changed fuel filter, drained old fuel and refilled with k own good diesel. We've purged the air procedure and all we are getting is crank, start for 4-5 seconds then it quits. This is an improvement, however, it just...