Search results

The quick connect coupler to back was disconnected. I connected it and put the hose in bucket with tank line . Screw the oil filler, I run tractor and oil flows from the pb line, not the tank line. My mistake forgetting to put the qc together . I suppose we should go through all those tests...

Just got back from tractor. Tractor running in neutral, fluid is flowing into bucket. There is no fluid flowing into oil filler

Oh hell, I have to go back to tractor. Be right back.

The unambigous answer is ...the line in oil filler....the line in bucket from tank on loader valve, Tractor in neutral oil flows from hose in bucket. I move joystick to raise and pressure increases coming out of hose in bucket The loader does not raise .

The one in bucket has fluid coming out in neutral and stream increases when in raise position. The fluid coming out in neutral I don't remember seeing before. Maybe I EFFed up before but this is what is happening now.

I start tractor and fluid comes out of tank line immediately. When I raise loader more fluid comes out tank line. Loader does not raise

Actually the loader is resting on forks. I connected the hoses to cylinders started tractor. Loader does not raise

Picture of right cylinder base hose disconnected. Fluid came out of the hose when lift raised. Plus pictures of both cylinders. Tested left cylinder same way and fluid came out hose

Okay, I will reconnect the tank line to loader valve, take power beyond out of oil filler and connect it. I have connected the cylinder hoses. The only disconnected hoses are the quick disconnect going to bucket. I will redo the tests we did this morning again. In my defense, I did ask...

Really, that is what is happening. What was supposed to happen? This is the setup we have been working with since post 106.. The power beyond is in filler hole, the tank line is in bucket. The 2 quick disconnects on left side of loader valve are disconnected. And when I disconnected...

Oil flows from cylinder both sides.

Got a late start today.. both the left and right lift have alternating fluid flow

Okay, I'll pick it up in morning:). I have more time now that we're done baling hay.

It's good pressure, too. Why is it not raising or lowering? Confusing and interesting.

Tha t is exactly what happens.!

Let me do it again, to verify . Be right back.

The tractor is still setup with hose in filler and tank line in bucket, other quick connects disconnected.

Fluid is flowing

There is fluid shooting out.

There is nothing going into bucket either if that means anything