Search results

  1. V

    Gear heads

    Neighbor loves his, great fuel milage, but engine will need to come out at 200,000 mi for the timing belt between the engine and trany.😢
  2. V

    Ideas/Advice stray dogs

    12 gauge, remove the shot and put in rock salt, then your next 2 round have bird shot. Really tough to remove the prey drive, especially a pack, got to do what we got to do...
  3. V

    oil for MX6000

    I use TS premium, if I ever have a problem, I will let you know. 5 gallons was $60, how much for 5 gallons of SUDT?
  4. V

    SEAT SWITCH

    Paper clip and electrical tape.
  5. V

    Box or Grading Scraper?

    A rear angle blade is more vestal. You would probably use an 8', so on angle it would cover your tracks, get the heaviest one you can afford, "more metal". Great for maintaining roads and snow removal. One of my favorite accessories. I finish with my 7', 3pt rake, to make pretty.
  6. V

    Heat Dome

    Weird summer, it is the coolest summer I can ever recall here in Comifornia, woke up to 41 degrees outside and 55 degrees inside with my whole house fan going.
  7. V

    Kubota L47 TLB 50 Hr Service

    Was a couple years ago, not sure which ones. If yours came with magnets your good.
  8. V

    Kubota L47 TLB 50 Hr Service

    Yes, they will need to be removed , examined, cleaned and put back on,could take a minute or two.
  9. V

    Kubota L47 TLB 50 Hr Service

    Look for and remember the magnets
  10. V

    Kubota L47 TLB 50 Hr Service

    Wish I would’ve known that when I did mine forgot to move the magnet to the new filter. Had to pull them off and lost 5 gallons of hydraulic fluid.
  11. V

    Titan 72" 3 Point 6 FT Landscape Rake

    Light duty rake, tough one to add support to. Yes, heat it red hot and a large pipe wrench. Then be very careful when using, they do make heavy duty ones. When buying my accessories I always look at the weight, more metal is all ways best for me.
  12. V

    Greasing Front Axle Support

    My L47 has the same mystery
  13. V

    Box blade tilt angle.

    Angle blade is one of my favorite implements, snow removal, drainage, crowning the road, ect. I have a box blade but really never use it.
  14. V

    Steering center moves continually.

    My L47 does the same.
  15. V

    Loader for sale bx

    Very unusual, makes me wonder.
  16. V

    What is this piece of metal in my hydraulic filter?

    Wow, now I see why they put those magnets in there, looks like their full of crud.
  17. V

    Rock Rakes???

    You will really enjoy it, one of my favorite implements
  18. V

    Removing BH92 Backhoe

    Make sure you’re on a completely flat surface and use the backhoe, pushing down on the ground and your outriggers, need to play with it to find out what takes the tension off of the pins. I always use a 3 pound sledge to assist me in hitting them, but it’s obvious when they’re looser or tighter
  19. V

    Man lift for tractor

    Looks fun for full size tractors, would be very exciting for our small tractors.
  20. V

    99 thru 2006 GM trucks

    My LB7 had a cluster issue when I bought it 5 years ago, UTube shows how to inspect, & repair faulty soldering, mine has been fine and free since. Not my injectors and CP3 though:cry:
Top Bottom