Search results

Here is what fits... I tried a trico rear 12" 55-121 using adapter A and it works fine. Pau7220 got it right with the 12-A blade that is the exact replacement size. Sent from my SM-N950U using Tapatalk

Length is 12" Looking at some picture online the Toyota RAV4 looks to be the closest one. It makes sense too being Kubota and Toyota are both Japanese companies. Sent from my SM-N950U using Tapatalk

Okay, while I was taking pictures I figured out how to remove the rear wiper. To remove the rear wiper blade you need to pull the blade half under the arm past its angle stop. After that it comes right out. Pic 1 is the assembly. Pic 2 is the arm end with the wiper removed. Pic 3 is the blade...

Thanks I will try to get some pics later tonight. I will say It's not a standard j style wiper arm it's completely plastic. If I can't find a replacement i will just change the rubber part. Sent from my SM-N950U using Tapatalk

Has anybody replaced the rear wiper blade on their B2650 or B3350 cab model? I have been searching and searching but can't find any information on a size or part number except the entire arm for ~$80. I have tried to remove it but it doesn't want to come off and I do not want to break it...

If you wanted to you can spend days researching oils and greases. The link is a chart of the base soaps used in greases and their compatibility with each other. Usually the grease manufacture will tell you what type of base soap the grease is, if not you may have to look into the safety data...

Well that is up to you. I was doing them on my car and boat for a few years. I learned some interesting information about idling for long periods. I may do them on my tractor just as another oil change record and to see whats the oil and engine is doing. A lot of problems can be detected in an...

The hoses for up and down control go under the axle and the chute rotation go over the top of the axle. This is how mine is set up. Sent from my SM-N950U using Tapatalk

summit-hydraulics.com and hosewarehouse.com have 1/4" NPTF flat face connectors. on summit they are under the iso 16028 connector and on hosewarehouse they are Dixon 2htf2 for the coupler and ht2f2 for the plug end. hosewarehouse also sells Eaton brand flat face but i don't have the part numbers...

When I replaced one of my hydraulic quick couplers I used Vibra-TITE 440 hydraulic and pneumatic thread sealant purchased on amazon. There are many brands of thread sealants you can use. Teflon tape should not be used but it gets used all the time even by a lot of dealers. Sent from my...

I did measure the o-ring and that was where my confusion started. When I took my measurement it could came out to be close to a 112 size o-ring but the numbers where not exact. The numbers are closer to a metric 2.4x13.3 o-ring actually. Thats where I dont know if its metric or standard size and...

Hi all First post to the forum but have been lurking for the past few months. I have been through all the pages of the service, repair, & maintenance section of OTT educating myself on issues and solutions that could happen to my b2650hsdc. Anyway I have b2650hsdc (purchesed new a couple...