Search results

Give Dans Tractor in battleground Wa a call 360 687 3000 They are Very good, Very helpful, and have great pricing. I have purchased two tractors and a bunch of compliments from them in the past 10 years and I highly recommend them. Explain your situation and I feel sure they will do all that...

I use an assistant.

Happy to Ron, I am in Florida at the moment but when I return to Washington I will snap a couple of photos and send them on. M

I built a dolly for my BH92 (1800 lbs) out of 2x6's with 2 large fixed wheels and 2 large castors I bought at HF. it worked fine except I used lag screws on the two castoring wheels, when I hit a little rock on my shop floor it pulled out the lag screws. So I have replaced them with 5/16 thru...

I have a Land Pride 72” Grapple on my MX4800 that was delivered about 4 months ago. It is THE most useful tool on my tractor. I am amazed at what it will do. I open it, stick the top down, and float it backwards picking up limbs, sticks even rocks. It works great as a rake and then you simply...

MJ, Congrats on your new Tractor. I think you will find that Grapple one of the handiest things you can put on a tractor. M

Give Dan's Tractor in Battle Ground a call. 360 687 3000 They will give you a quote. I purchased a BX2660 and recently an MX4800 from them. Good price and good service. I could not ask for better. M

That is the Truth! One of the best investments I have made, makes lubing Much Easier! M

Here you go... https://www.wearecb.com/procomm-180-degree-cb-antenna-swivel.html

MX4800 62 hours had it two months, only issue has been a few loose bolts. BX2660 280 hours had it 7 years, Only real issue is stuff gets up in the trans cooling fan, and... now that I have the MX, I realize how light it is... Great little tractor though. Just had to replace the battery.

Make sure you check the torque on the wheels even if you are going to have the dealer service it. On my MX4800 I went to check mine at the 50 hour mark and all of the front ones were loose, causing the holes to oval out. New ones on order. Also, the new hyd filter comes with the magnet already...

Wolfman, what a great tip! I just finished leveling about an acre and put my topsoil back on, it was full of rocks and small sticks and I spent two days with my rake trying to get them out, most of the time ending dragging around a pile of dirt in the rake. Makes sense, I will give it a try...

on boats with diesel engines, the engineer doing an oil change would drain the oil then fill the crankcase with diesel, crank it and run it for about 10 seconds or so, then drain the diesel which would wash the top end and crank case of old oil and sludge. M

Well! Yesterday at 44.2 The regen light came on. I kept on working at 2200 RPM and no problems. The engine sounded slightly different but other than that and the light no change in the way she operated. Thanks everyone for the input. M

Thanks Ted. No, only display is a little indicator that (I assume) is lit during the regen. M

Have had my MX4800 for a couple of weeks now, it has 35.1 hours and I have not had a regen yet. I have been reading the forum and everyone seems to have a regen between 15 and 30 hours. I run it between 2100 and 2600 RPM, varying it often as it is brandy new, and only idle it for a few minutes...

I was in the same quandary, looking at the same tractors two months ago. I decided on the L3901 when my wife spoke up and said, "Get the 4701, you will never regret the extra HP. (and the PTO is much better on the 4701). I was ordering it and the dealer said "The MX4800 is only $800 more and is...

Bearskinner, Sounds like fun! do you have any flat grass fields or dirt roads close with no power lines? Someplace I can set my plane down? Need 500 feet but more is always better. M

AKD, I have had the BSM 84 for a couple of weeks. It seems stout to me. I have been using it to cut down a hill and move it into a valley. I have gotten into rocks now from fist sized to some a bit bigger than a basket ball. I drag the rippers through it and it digs up the rocks. So far I have...

I purchased the Land Pride GC1072 for my MX4800 and am very happy with it. It does much more than I thought it would do. I works great for picking up stumps, rocks, brush and limbs. Takes a bit of getting used to though, but once you get the knack of it you can do a lot with it. One thing...