Search results

I could not find those connectors either. I just soldered mine in

Added led lights on front, rear, sides and also on front axle to see low. Looking to get a Post hole auger

B2650HSDC. I have a B2650 tractor and specs show it rated to lift 920-970 lbs. I am using forks and not able to lift more than a 45 gallon drum of water. If I try to lift more it just stops does not go higher. I have not adjusted the presuures since purchased. I only tried lifting a few months...

I seem to have an issue with my tractor. When I stop while using the hydrostatic pedal it does not centre very well. I stop and it does not seem to move. I get out and it starts moving. I noticed I have to listen to see if pump is making noise or it will move after a while. Is this normal...

Hi all, this is not for loader but forks. My forks only lift about 450 lbs snug up against the QA . Not sure how much bucket lifts but I do have a ballast box on as it is very unstable without. I have jut about filled my bucket with gravel and lifts it not bad but have to be careful driving and...

Yeah, I have a B2650 and it fills up too. I take the pulley gaurds off and clean out after each session. It is a pain but have to do that rather than damaging a belt and have to change. Sure finding out lots owning tractor for first time. Lots to spend on

Just doing same installing work lights. Cannot find those connectors and Kubota dealer not much help. told me have to buy the whole light kit. will be installing with different connectors and switch. Where did you find the wiring in the cab to those connectors in the back? Is there a connector...

Hi all, have been using my new B2650HSDC for some time and man really love it. A bit shy on lifting weight but just have to do. I purchased a quick hitch and does not fit my Landscape rake a LandPride LR16. The CAT1 quick hitch is 26" pin to pin and rake is 24" so too small. Is it OK to get...

All the best to Paul as I enjoy his videos and they are helpful. Hope for quick recovery. Prayers for Kathy also.

Welcome to OTT. I am new here and to the tractor owner part also. I purchased Ken Bolt on hooks and they are great. I live in Canada and looks like have to buy all the cool stuff from US. I have purchased a lot of implements so far in the one year I have owned. There is still more out there. My...

Pole sheds can be finished and insulated . sided with steel they look just as good and will function as well as a steel building. There sure seems to be a lot of them out there have been around for long time. Guess it is just personal preference and money.

Bought a set from Bro Tek and am in Canada. As my fellow Canadian says cost a bit due to exchange , freight and duties but needed something as tractor was quite tippy. Hoping this helps wont hurt for sure.

Hello MyB3350. Showing you have 4" spacers on your tractor . Is that 4" on each side?? Where did you purchase those. And yes definitely agree about ballast. I just put a Kubota ballast box on and loaded with gravel. I have almost tipped 4 or five times without. I use my forks a lot . find I max...

Hello all. Newbie here yup it is cold up here in Canada. I am trying to figure out my tractor glow plugs. Turned key on and the indicator does not light up. this is a B2650 HSDC. Have to call dealer to check. I have left my tractor plugged in to start. I did start it at about -20 not plugged in...

Nice Tractor. I purchased one with Cab. On hills feels a bit tippy. I just added the wheel spacers and rear ballast box filled it with gravel. Was even tippy when using FEL so far feels more stable. Have not tried it on hill sideways as not really good to drive on the side of hills . Does not...

I have a Cat 1 # pt hitch on Kubota 2650. the bottom pin holes are larger than the top pin. I purchased Kubota ballast box and the holes are all same size. The bottom holes would also use small pins but are loose in the hitch lower arm swivels. Do I need to drill out the balastt box holes to fit...

Have to put my .02 in also. I purchased three hooks with hardware from Ken's. Well worth it and I am in Canada so had to pay exchange and hefty freight. I now looking at the new hook Ken has the ball dog plus . thins that would be very handy in many situations. Used the Hooks and sling with...

Hello all, had a large tractor come in and disc up the whole front lawn about 2 acres and left the back to see how the front turns out. The large tractor with dual wheels 14" discs had hard time as the grass was hard to cut through but aftyer going over multiple times turned the grass over...

I have a B2650HSDC and side mowing not very good feeling. Others are correct feels like wnats to tip over. Use our zero turn and go up and down instead of sideways. The B2650 has pretty narrow track. Other than that I am enjoying the treactor.:D

Yup, agree. Kenny's Bolt on Hooks. Got them on my bucket and have used for a few things already. May get more so have better versatility. You may want to get the drill bit also if you do not have one.