Search results

Guys... this is the first time I have ever left a mug shot on the net.... At least the flies won't be liting on us... :o Butch

Joe... here is my first stab at posting a picture... Just one note... If the parts to be drilled were steel you could use a magnet to capture any cuttings from getting in to the housing when you drill the top hole... unfortunately it is aluminum:(. So.... I'd suggest taking it apart to drill...

Logan... any chance you could post a pic of your control valve? If it is a Kubota/Husco I may be able to help. I just went through a repair on mine. There is not much to the valve, however if it is the Husco there are a couple of things that you may be able to do to fix the issue. Chech the...

Joe, I will see what I can do with pic or two... may take me a day or so... Butch

I talked to Messicks right after the online catalogs went off line. There is a work around that they will get the drawings to you... just not over the net. Give them a call and they will explain the process.... I could try... but it is past O-beer:30 and I don't want to steer you wrong:D:D...

K-Bee, I believe you honed your cylinder. Can you share with us how long the cylinder was and what kind of hone did you use? I have a hone but it is for automotive cylinders.... not long enough to do a loader cylinder even if honed from both ends... Have a great day! Butch

Guys, Tractor specific for the use of the Kubota Husco control valve:rolleyes:... gotta say yes to some extent. Kubota had a propriitary agreement:mad: with Husco for the B series and most of the L series tractors where the control valves were mounted independently of the tractor itself. They...

There are just some things that are not covered in a WSM or operator's manual that we stumble upon that make good sense in prolonging the life of our tractors. Now there may already be a thread that I have not uncovered yet that covers this.... so if there is please feel free to redirect me...

Ahhhh..... it ain't quite dumpster diving. What I did was approach the produce manager and asked him what he did with the fruit pulled from the shelves the night before. That's when he said it went to the dumpster. Right now I save him a trip to the dumpster. I pick up the fruit at 7:30 AM and...

All is fine guys... just been busy running here and there trying to put together applejack mash. Got hooked up at a local supermarket to scarf up the daily throwaways and much to my amazement... the apples were still in perfect condition. I looked in to it a bit farther and they throw a butt...

I am back just been tied up.... will explain later.... Butch

My neighbor experienced a similar encounter with his 4WD L35. We put it in my shop up on jack stands and ran it. We found the wheel was being stopped when it binded (rubbed) against the subframe at full turn. Further inspection showed the stop that was bolted to the axle housing had broken off...

Dear Digg71... Just like the guys said... you can't get all the fluid out and what you ended up with is just about right. Trust your dipstick Jimmy! (remenber the Castrol oil commercial) With me and my "orange mistress" :pI don't start sweating until I work on it and find I have a few nuts and...

This is worth a new thread... The Husco valve that has been giving me fits is fixed....once and for all. We x-rayed the monoblock stripped down to just the block.... no cracks, broken pieces, or blocked internal honey comb. So we took the spool and chucked it in a lathe and analyzed its...

Me... not a clue. But when skeets brought it up I knew my brother would know for sure if that was what it was... Not holding out on this one.... I had Nooooo clue.

I had a B2150 4WD w/FEL. I had a raised bucket FILLED with rock ready to roll the bucket to dump. I was on reasonably level ground on the back 40 along an old fence row. That's when all hell broke lose. I was dead nuts sitting still... not moving an inch when the right front wheel abruptly...

Seeing as there is not much info out there on the Husco control valve that Kubota used extensively on their equipment I thought it may be a good idea to post this link to the Husco International site. The link has the shop drawings of the monoblock 9210 valve Kubota used. Hope someone may find...

Bingo! Skeets is 100% correct as it was positively identified as a variable weight conveyor belt tensioning pully weight box. I ran skeets idea past my brother who worked his way up in the industrial rubber/belting industry and he confirmed he had worked with many of these in the coal fields of...

It is funny that you posted a picture of Forrest hot footing it.... I told my crew if I ever heard "oh-oh" or "oops" on the com from within the containment structure after a munition is popped:(.... I am going to scope out :rolleyes:the wind sock and the next thing they will see is my tail...

Tailrotor... where in Pa are ya? I I am dead south of Lancaster 4 miles into MD.