Search results

You'll get all kinds of answers, start slow until you get the hang of it. I think the manual "recommends" at least 75%. I usually run mine at WOT as it helps keep the DPF clean and makes up for all the low RPM puttering I do.

Slowly finishing finance committee projects - ran out of steel edging, guess she’ll have to wait a little longer 😎

Normal - pads down Inverted

I forgot to post this awhile ago sorry. For all of you that have a backhoe on back. Reverse your pads for soil work. Wow, what a difference in traction. Machine stays planted - makes it harder to crab yourself around but it’s worth it. I just use a hitch pin on the other side of the pad pin.

Somebody on here posted the tint they had done on their two Kubotas. It looked really nice, you’ll have to search for the post.

Granddaughter got her first ride in the tractor today :)

If in doubt - pay it out! More in the tractor world is usually better.

I would think you would want a turbo at that altitude?

Go with SpeeCo eHitch and forget the bushings. https://www.goodworkstractors.com/product/category-1-e-hitch-quick-hitch/

Ok now weld a QH on it and you can move 3PH attachments easily. I had my fab shop add about 2" at the bottom so I have longer motion range. There are plenty of threads on this here on OTT. I go backwards and rake leaves with the 3PH harrow.

I have the next step up from the GL3560. Get it! The Grands have many features that are nice. Yes on the LA805 and the BH92, it is a beast for what it is. add mechanical thumb for BH92 air ride seat 3rd function 2 rear remotes hydraulic top link QH HD bucket and cutting bar on the BH92...

R-4’s here and they are grooved for better winter traction. Ride kind of rough on the road though especially in winter.

I haven’t checked it. On the arm rest I think it is fixed at the seat and the roller adjusts it at the end, I may be wrong on that though.

Factory air ride seat installed in spring. The arm rests adjust up and down via the grey roller. The manual is available on Grammer’s site.

The “hoe” and I removed landscape rock from the kids house to make room for outdoor AC unit.

Couldn’t live without my little hoe 😅

32x40 here, built in 2012 just finished inside last year and built out 16x20 she shed inside. Plan to add 12’ wide shed addition on side. I went with 10’ sidewalls and 9’ OH doors. One is standard 9’ wide and the other is 12’ wide. I really like the wider door. Two zone mini split heats and...

Got the darn BH92 cover back on. I imagine this cover is installed to tension the bolts so there’s no rattle or loosening bolts but wow, it was tough for me to reinstall. Oversized the bottom holes a tad to help. My simple projects to major deals never ceases to amaze me.

I shouldn’t complain though it will lift a lot.

You should be ok with normally aspirated engine. Only downside I have with 4060 is the LA805 loader lift capacity. Oh, and the height as I need to dump into trucks with sides.