Search results

Assuming that you want the rear blade for your L3800? I would really be looking at an 84" wide blade. Your tractor will handle that and you want your tractor width to be covered when the blade is angled over at 45*. You can get by with a 6 footer, but much happier with the 7'. Next question is...

The different holes change how high the implement will be lifted when raised up, it all has to do with geometry. On some tractors that have draft control controlled by the top link, the holes are used to change the sensitivity of the draft. ;)

You should be able to look it up on the Kubota website under build your tractor section. Off of the top of my head, about $800 each is list price.

When you say do it yourself, do you mean to install the Kubota OEM remote yourself or are you talking about buying aftermarket stuff and designing the set up yourself? Since you have ordered the tractor, I would get the tractor with the remote-remotes already on it. I say remotes, because I...

So what is it that you will be using the 3 remotes for?

WOW, you don't mess around. To get it all done in less than 24hours. VERY impressive.

If you have a kind Kubota dealer, I think that you should be able to get 10-15% off of those list prices. It sure won't hurt to ask. ;) Oh, since you are getting these for grading purposes, I highly recommend that you get the next 2 with the float function. Many times using the float function...

If you don't mind spending some money, I think that you can get everything from Kubota. If you plan on doing everything yourself, then you will need to do some research. Are you going to build your Top and Side Link units yourself, or are you looking to purchase ready to go units? Here are a...

If you are a good fabricator, you can get a 6" stroke cylinder to work, but it is tight. Otherwise just use a 4" stroke unit. Typically for your size tractor I would use a 2" dia hydraulic. I also highly recommend a flow restrictor, makes the adjustments much much easier. As far as the rear...