Search results

While troubleshooting a safety start circuit problem today on a cab type M95s we somehow angered a siren of some sort in the cab. Owner says he's only heard this go off when he tries to leave the seat with PTO running. Well, no PTO on, engine is off, and still this thing is now squealing away...

Thanks. Sounds like yours works pretty well. I believe the system in the M9000 is pretty similar to the 8200 even though the part numbers don't match exactly. The diagrams show the layouts to be pretty much the same.

If the compressor clutch is cycling too frequently, I guess a defective clutch coil may be a possibility, but in my experience when they fail, they fail. They don't come and go. More likely the cause would be either a defective thermostat just not sending the clutch a proper signal long enough...

I've gotten mixed reviews about Kubotas. Some have told me their tractor's AC has been only fairly effective since new. Others say they have plenty of cold air. I don't work on a lot of Kubotas so I have very little to draw from. I know that some later models have been improved with larger...

No takers yet? Not looking for a bunch of questions, theory or explanations about how air conditioning works. Mainly hoping to hear from anyone with one of these tractors willing to share some feedback on how they would rate their particular system. Good, fair, poor, or what have you? Freeze you...

Question for owners/operators of an M8200 cab tractor. How satisfied are you with the performance of the air conditioner? I'm presently working on one that seems to be under performing. Thought I might ask for some feedback from someone with first hand experience with one. Judging by the system...

Thanks 100 td. I can't beat that for the price. It took a while but I finally found the shuttle removal, tear down pages and have that bookmarked for quick access next time. I haven't seen it yet, but it's an open station DT model. Apparently the reverse side of the synchro has given up the...

No, I don't currently have the WSM, and yes I fully expect to split the tractor at the clutch housing. Am I wrong in assuming the shuttle unit, complete with synchronizer will come out through the exposed opening in the clutch housing without another split at the back of the transmission? I...

It appears the shuttle assembly is at the very front of the main transmission gearbox, and should come out through the clutch housing once the tractor is split at the engine. Anyone had one apart and/or care to share some insight on the experience? Could it be as simple as removing the...

That sounds like a good place to start. Thanks

Looked at an L5240 HST today. The owner says the code -80 has been there for some time now with no ill effects. Below the error-80 the display also reads SUB N6 It could be NG but looks more like a 6. Anyone have a thought or two on what this might mean?

What you see is far more common than you might think. If I were on the phone with you discussing this problem(as was your dealer's shop tech) I would be telling you the same thing. Tractors with solid splined drive(propeller) shafts need to be in relatively perfect alignment front to rear, or...

Based on your last post I wonder which end of the injector lines you tried to bleed? It needs to be done at the injector, not out of the pump. The object here is to allow the pump to fill the lines or the engine will never start. Once you see pulses of fuel at the injector, then tighten the...

Maybe here? http://www.ebay.com/bhp/kubota-steering-box

The term "no power steering" is key here. That can be/mean a number of different things. The steering wheel doesn't turn when usual effort is applied, as in low oil supply from steering pump. The wheel turns easily with no attempt at actually moving the tires, as with a steering cylinder...

I believe there are replaceable bushings in the mounting flanges, but they ride on solid parts, The front wear surface is a stub that's part of the center housing and the rear wear surface is part of the differential support housing. Doesn't take much movement in this are to cause the...

I'm referring to the entire front axle assembly where it pivots under the front casting. Jack the tractor front(not the axle, the tractor) up until the tires almost clear the ground but not quite. When you reach the right point, you can roll either front tire forward and backward and tell if...

Replacing the ring and pinion may not be necessary just yet. You should first concentrate on the cause of the spline damage/wear. The front axle pivots and bushings. Many Kubotas, particularly among the smaller ones, have no provision for greasing this area, thus they are often neglected. I've...

If I'm reading the parts book correctly(and it's always questionable) it looks like bucket cylinder for LB400 above ser number 16445 should take kit number 75545-64600.

No, that's not an issue. The oil is leaking out the axle seal, not at any housing joints.