Search results

I know that Kubota recommends the UDT2 transmission/hydraulic oil - but what other brands out there are high quality hydraulic fluids that you guys use on your rigs? In my old tractor I used the TSC universal, never had any issues...but that tractor was older, had some leaks here and there and...

Has anybody ever used 4 Star Tools (www.4startools.com)? They have a good price on a SSQA....but I've not personally used them and am always leery of scam sites. I've done a couple of searches and can't come up with much on them either good or bad, which is kind of weird to me. Their SSQA is...

I watched those videos with him using the 10' batwing on the 3038r JD - but it was all during winter time when everything was dry and dead. Looks like it worked great, but I'd like to see that combo during the spring when conditions are a bit more challenging.

I have an L3800 - a smidge over 30hp on the PTO (hydrostatic). Right now I run a Land Pride 48" shredder/rotary cutter because that is what I had for my smaller tractor before I upsized. While it is extremely nice to be able to drive at virtually any speed in the L3800 and cut with almost not...

Suppose I had an extra hydraulic valve laying around that is collecting dust and thought that it would be nice to potentially implement said valve by installing some rear hydraulic ports to my B2410. Is there a drawing that shows the plumbing routing that I would have to do for this? I have a...

Looking for a used bonnet for a B2410 (2710 fits also). Doesn't have to be pretty, I can repaint it just fine - but want it sound and free of rust holes, etc. Unfortunately new ones are unbelievably expensive and I'm cheap.

I have the rear tires and wheels (R3 I think is the designation) and the front wheels (tires are not salvageable) that were original turf tires from my B2410. Only problem is that I'm in Texas, not sure what shipping could cost you to get them to NC.

I have a solid one from my B2410 that I replaced with another adjustable. In perfect shape, I'll never use it again.

I'm looking for a replacement hood bonnet for my B2410. Thought I had one lined up at Colemans, but they emailed me that that part number was different and that the cost would be almost 2x what was on their website. Doesn't have to be new, just dent and rust free. I can prep and paint just...

When my B2410 was doing the same thing, though not nearly as fast, it was because of a cracked head. Pulled the head, bought a new one and replaced most of the upper part of the engine while I was into it (head, head gasket, injectors, injector rails, valve cover gasket and valve cover for me...

Thoughts on this brand? I need to get a 4' shredder to use at my deer lease - nothing too major, mostly mowing ROW's and around camp to keep the grass and weeds down. I have an old Ford 4' that is a tank, but my buddy that actually owns it is unfortunately needing it back. My tractor is a...

That's like asking what is better between Ford, Chevy, Dodge, etc. - it's pretty much pure personal opinion and preference. I'm a Royal Purple fan myself, have used it in everything I own for decades with great success and zero issues. Some folks like Amzoil, which is another extremely high...

I would suggest renting a seal puller from Autozone or whatever. It will make life much easier than trying to jerry-rig pulling it with the shaft in the way and in that recess. Or you could do what I did and just buy one off of Amazon for about $40. As far as putting it back on, you need to...

I'm installing a FEL on my B2410, it isn't the factory version so I'm kind of winging it here. For the most part it seems pretty straight forward once I finally get all of my mechanical items completed. I do, however, have a question on the plumbing for the FEL valve. There are 3 feed/return...

I need the small spring in the detent kit, that's it. Hate to pay $150 for a kit when all I need is a $1.00 spring. Ordered one off of Amazon that is pretty close to the measurements I took, we'll see if it works or not.

I have a Husco valve, Kubota Part no. 75540-61013 (has been superceded by 75540-61014). Does Kubota make a rebuild kit for this hydraulic valve? I have some binding in what will be my bucket curl/dump side and while I have it on the bench, would like to replace any guts that are in need. I...

Mine has fit every single implement without any major issues, save for the box blade that was never designed to be used with a QG to begin with. On that, I had to mill the top hook of the QH down about 1/16" thinner to allow it to fit in the gap on the top pin of my box blade.

I have a Harbor Freight brand QH on my B series, love it. Had a finish mower for years, worked just fine with the QH - the poster above that says that they don't, guess it depends on brand. Mine was a Land Pride and it worked perfectly. Box blade, bush hog, my little disc - all fit up with...

I have a B2410 with a front blade, though admittedly I don't know the exact model at the moment. I just picked up a FEL for it, so the blade and most of the subframe will likely be looking for a new home.

I can print the exploded parts view from Kubota and get pretty close to the subframe design of the LA 351, which is the original FEL specified for my tractor. Will be a project, but having a neighbor that owns a welding shop and who is pretty darn good at what he does kind of helps.