Search results

I have a Wallenstein BX-42 (4") that I run @ 996 PTO RPM. The B7610 handles it fine but it is manual feed. That can be a real workout and dangerous. I wear a forestry Helmet and have been whacked in the back of the head too many times.

There is a lock out plate that has to be moved. I use the 960 rpm for running the wood chipper.

Be sure the 3PT lever is in neutral place as well as any other hydraulic valves you may have. see post: http://www.orangetractortalks.com/forums/threads/m5400-hydraulics-almost-dead-this-morning-working-last-night.56171/#post-527108

Been there, Done that. Sometimes I knock the 3 PT lever off center. The first time, I had to call the service dept. and they told me what to look for.

I certainly love the view from the elevation but spending 2-3 hours clearing the 1/2 mile private road this weekend was no picnic. It's like a ski jump with the ice we had. One disadvantage with a steeply sloped parcel is every time we want to add a shed or barn, you have to call for a...

Great idea! I have the same problem in the summer time grading the road. Thanks for the idea.

Here are some ideas that might work. You can put the standard belt through the loops and not use the metal tangs that connect to the center of a 5 point harness. There are various mounting options. https://www.summitracing.com/parts/rjs-16001901...

I went to "YOU", second banner down ON RIGHT: "YOUR PROFILE" then "POSTINGS" It may depend on your starting page, it varied from where I started....

We have had Tracfone for 20 years and dropped the landline when we retired 5 years ago. Out phones have sequential numbers and it only costs about $8/mo/phone when I buy 2 years of airtime. We've never run out of minutes or data, I've spent more time on hold than talking...

Must be a Kubota thing. The radiator hose clamps on my RTV-500 would not stop leaking. I finally had to double clamp them in an impossible area to get to.

I use the Group 51R in my B7610. https://www.walmart.com/ip/EverStart-Maxx-Lead-Acid-Automotive-Battery-Group-Size-51R-12-Volt-500-CCA/28275660

What I did was leave it and go in the opposite direction at the end of the season. My garden was fenced and I would pull the fence on the two ends.

What RPM were you running at? Try the test again at 540 PTO RPM and see if the results are the same.

I have a 5' clamp-on blade on the bucket and a 5' rear snowblower. I have a very long steep downhill gravel road. I plow downhill to one side of the road and then blow the windrow away going back up. One more trip down with the blade angled clears the road. Sometimes I angle plow going back up...

What about a pine straw rake? https://www.palletforks.com/tractors/3-point/landscaping-equipment/6-ft-pine-straw-needle-rake-for-cat-1-3-point/191322.html

We bought the RTV500 several years ago and my wife loves it. It's small, quiet and she uses it all over the property. The only problem I have with it is that it will not go uphill in high gear. We have a steep 1/2 Mi. private road and I take it to the mail box everyday and it takes too long to...

I've had a Meteor by MKMARTIN for years. No problems at all.

ONE CAUTION, THE SLOW MOVING VEHICLE SIGN BLEW OFF THE FIRST TRIP, AND ALWAYS REMOVE THE KEY, I HAVE LOST THEM ON OTHER MOWERS DURING TRANSPORT.

I do not have a backhoe but I did transport my B7610 with a tiller/ snowblower / backblade with a 5x10 dump trailer. I built a frame to holdup the loader to protect the tarp roller. The ramps set into a channel welded onto the back of the trailer. I added tie down loops from Harbor Freight at...

THE PLUG IS AVAILABLE SEVERAL PLACES: SEARCH: Kubota Fuel Camshaft Plug Part # 16241-96262 WATCH THE SHIPPING, SHOULD NOT BE MORE THAN FIRST CLASS $3-$4 OR ORDER FROM MESSICK'S AND GET ALL THE FILTERS & UDT OIL YOU NEED FOR THE JOB.