Search results

Gotta remember for a pump to develop the rated GPM, the engine needs to be turning fast too. How much fuel will your tractor be going thru in an hour? Plus, the noise of running your engine that fast.

Had to make an extension to the latch that allows the guard to tilt forward. A little lathe project.

A couple weeks ago, I purchased a Glacier Storm single thumb root/brush grapple for my LX2610. It is the 60" wide model. After some costly couplers from my Kubota dealer, it is now hooked up to the 3rd function I had installed when the tractor was purchased. Initial feedback is that I think...

Shipping to a residential verses commercial address often costs more because of insuficent equipment to unload the parcel, and amount of time to do so. Zip into a commercial dock, fork truck runs in & out, and they're on their way. If the trucker has to wait for you to find your forks...

Orange would be nice, but white reflects radiant heat. Any darker color will absorb solar energy, and you will feel it under there.

Understand your concern. Thanx

Hey Dan - - Planning on putting a basket on the forks so I can trim trees from. Wife will be driving the tractor. Don't want to give her the opportunity to flip me out of the basket, as she's not that mechanical.

Thanx !

Made some for my sheds in the past. Couple things: 1) Lay out the pattern on your driveway with chalk lines and build to those. 2) Mark the same end while laying on the driveway, and assemble on the building with all the same ends on one side. Flipping occasional rafters can amplify any...

1) Pilot hole is recommended on any hole larger than 3/8" if drilling with a hand drill. 2) cutting oil. 3) Good quality drlll bits. 4) Understand what a good sharpened edge looks like. Learn to dress the edge by hand, or find a drill bit sharpener. 5) Learn the feel of the feed thru...

Anybody ever put a flow control(s) on the hydraulic lines to slow the action of the bucket curling? Wondering what you did and how it worked out? I'm wanting to limit the speed of my curl at certain times. Thanx !

Modifying your ROPS is your choice, but if you ever decide to trade that tractor in, a dealer will need to discount your tractor for the cost of replacing the whole ROPS bar (upper & lower). He can't sell it if it's modified. Many people do modify their ROPS. Some poorly. They are designed...

There's a lot of moisture coming off concrete as it cures. Caution as you park stuff in there more prone to rusting for a while. And keep the doors open to keep moisture from building up.

Anyone have experience with the 48" Storm grapple (made in central Michigan) for $1399? Would be using mine on an LX2610 for brush use and some firewood log moving about. Wondering if the thing is strong enough for general conservative use. Thanx !

Those rubber expanding sewer pipe plugs would work in your cross tube storage thought.

Adding forks to a bucket pushes the load center farther from the loader arms, diminishing the lifting capacity.

Recently brought home a quick hitch for my LX2610. Most all that I see are made for the larger class 2 pins, including this one. Folks generally spend lots of money replacing the pins on their implements. Instead, has anyone ever bent a strap as a gap filler to the hooks to get rid of the...

Made mine last year from a slightly used 10x24x30 electrical panel, TSC draw bar, some angle iron, and a 2" receiver. The draw bar is bolted thru the back of the panel with long bolts so the heads would be well burried in the concrete. Calculates out to about 550 lbs and works great. Zero...

Bought my LX2610 back in April 2021 to manage my new home in the woods. Bought it with the front end loader and fork attachment. Back tires loaded. All the reading I did, I was coming up with a ballast box for about 600# of ballast. I can lift to the extreems of the loader and the rear...

Greetings all ! Proud owner of an LX2610 this past Spring to help around the new house in the woods. Living in central western Michigan, and got our first real taste of snow this weekend. Most of my 1300 driveway is gravel and "earth". I'm waiting for the ground to freeze to reduce...