Search results

I built a cart for my wood chipper. One of my rare better ideas. I used scrap 2x6 lumber. (Germans tend to over engineer). I bought family small coaster wheels to mount under the frame. I find that solid steel ones roll the easiest by far. Park the tractor, and roll the thing in place. Works slick.

I changed the fluid in my F2560 and my RTV500, and replaced it with a generic fluid. I didn't notice an enormous difference in the RTV, but the F2560 was far noisier and it seemed the forward aft pedal was sticky. I probably did not put 30 hours on the F before I dropped it and put in the UDT...

I have a G2000 gas, and a F2560 Diesel, both of which have electric fuel pumps. The 2560 suffered for several years from low batteries, and intermittent sputtering. Replacing the battery did nothing, so I decided to pull the alternator and get it tested. Turns out the big nut holding the wire...

Well since I posted this, I have found an extremely patient service mgr at Haug in Willmar, MN. After quite awhile on the phone, and reviewing serial numbers and updates, he discovered mine was made prior to Kubota changing the tranny vent from an inverted J pipe to a cup type, with a cover...

Thanks. Needless to say when I asked my local dealer about it the response was "I have never heard of that before" :)

I have a F2560, 790 hrs, good shape. Have owned it 11 yrs. New UDT2 hydro fluid, filters. I have never had a problem until I started driving about 1 3/4 miles in high gear to mow my daughters lawn. After about a mile, it will shove some hydro fluid out the breather, not a lot, just enough to...