Search results

Hey man, He's obviously concerned about safety. He has the PTO shaft guard on.

Did you verify the PTO spins with the clutch pedal all the way down?

Finishing up the job here. Tailpipe back on. I know, my welds look like a mud fence. While I'm dirty lets do an oil and filter change. These skid plates do a good job of collecting dirt. Three Kubota filters, one made in China, one made in Malaysia and one made in Indonesia. Since they were...

What time is the venison roast going to be done. I'll bring a side.

I voted 1 Bought new in 2011. Just passed 2,000hrs about a month ago. I use the hoe alot

Thinking out loud here. If you got a union to tie the lines together, as you pulled the old one out you would be pulling the new one in. I think those are JIC fittings?

I'm wondering how many different parking brake setups are on these tractors.

A lever down below the loader control.

I bought a '49 8N years ago, had a new battery in it. I used that thing almost every day for over a month when I noticed it wasn't turning over as fast as it had been. Turns out the alternator wasn't even hooked up.

Mine does the same thing. TL1000A loader. Self level is selectable, I don't use it.

Can you see how many volts the battery has while cranking?

Got the parts for the starter. Out with the old In with the new Back together Pretty easy job

Tell him not to do any carrier landings with the loader

The starter didn't fail, the contacts in the picture above were pitted, not allowing juice to get through to the starter motor. Cleaned them up and it's working, hopefully till the parts kit gets here. Running it with limited use until I can get the pipe welded. I'll get my gas bottle filled for...

If this was an old chevy starter I would know exactly what was wrong and could fix it. Turns out it's the same thing almost. This is on my RTV. Got down there looking and see this. If that looks like the exhaust pipe is broken that's because the exhaust pipe is broken. Didn't get a pic before I...