Search results

Hi Butch. Thanks for starting this thread, your first post doe's not apply to my tractor but I am sure there are lots of people on here that it does help. I think the threads can be make and model specific or not. Someone at sometime will use the tip and maybe save a few bucks or a few hours or...

Hi Logan. I have an after market loader control on my B8200 and it was doing some thing the same as yours. It had three allen screws that went through the bottom of the joy stick to the control. Two of the allen screws were loose. Good luck & keep us posted.:D Dusty

Hey Slim, CCW PTO just means that the Power Take Off runs counter clock wise. Snowblowers, Rototillers and such her in north america run clockwise. It has nothing to do with the Three Point Hitch :D Dusty

You did just right Royboy you showed him where they were when no on else had a clue. Parts and wsm are a must have. :D Dusty

Ahyup you can put weight in the bucket or hang them off the front of the tractor as in suitcase weights or you can make your own bracket and weights. What ever you put in the bucket make sure its gonna stay in the bucket. I used to love plowing, all alone , no one bothering you, no phones. Just...

Hi Logan. You gotta love a quick fix because it doesn't happen that often.:cool: Dusty

I will take all of your advice I can get Scott. So far it has been nothing but good.:cool:Dusty

Hi Lil175 Did you find the screen / filter. It may have an intake screen and an output screen and a spin on filter. Or it may only have one or two of the above mentioned.Untill you find them and clean or replace them. You can't really go any further. If the system is plugged and you replace the...

Ditto on the sad. Dusty

Sorry to hear that, luck is a fickle mistress. Keep us posted.:mad::(:D Dusty

It's really cool that we have some one on the forum that is willing to toss themselves to the Hounds:cool: Thanks Scott. The tractor gets ticked if that vent is plugged and some times Kubota doesn't put them in very good spots like right where dirt can build up around them.:D Dusty

First I just tried to replace the seal but it did not hold.it turned out that the pump was just worn out.It wasn't a big job to change the pump. But it cost around $600.00. Never had a problem after, and with 3500 hrs on yours I would skip the trial and error and just do the pump. If your...

Hi Guys. The forum does seem to be getting busier (is that how you spell busier?):D Dusty

You said the oil was clearer than it was. Hydraulic oil or diesel fuel, if it is deisel you can smell it. With 3500 hrs it probably has some blow by as well. If it is diesel in the oil I would not run the tractor. If it is hyd oil you can run it to load on a trailer or to move it, but I would...

Hi Africa. Best I can do for the moment is a pic.:D Dusty

Hi Kevin. Check your Hydraulic oil level. I had a bad seal between the hydraulic pump and the engine.Hydraulic was seeping into engine oil. Just an Idea. May be some thing else. Good luck and keep us posted.:D Dusty

Nice looking tractor Slim. Looks like good tin. I always seem to get the ones that are banged up. But then again that is what I go looking for. You are gonna have a blast with that thing.:cool: Dusty

This is a picture of the block on a B8200 the bolt sticking up at an angle with the little tit sticking out below it is the selector valve.:D Dusty

Joshua, I was just reading back through your posts. and at one point you said that you're tph was strong but the loader was weak. On the hydraulic block where the loader hoses join to the tractor is there a selector for tph and loader.It kind of a shot in the dark but if that selector valve is...

Hi Guys Thanks for the replies. I may be changing things a bit. I have to talk to my son in law, He is the guy that has all the experience with this stuff. I watched a few vids on utube and I really like the power box rake. I have a box of carbide tips that I had no Idea what to do with. Now I...