Search results

whereabouts in ontario are you? I’m in Eastern Ontario. Waited quite a while en lol, I joined a few weeks ago, just got my BX last spring.

whats the wooden box for at the left side behind the FEl??

that’s my plan, I’m either going to get a single 40’ and build and overhang or get 2 20’ ones and do a peaked roof and put them apart and gravel between them. Where I’m at, if it’s not considered a permanent structure I don’t need a building permit. Talked to a contractor and he said we can...

Most of my winter is below zero except of course during the day when I’m stuck in my office and the sun is shining lol

Happened to me and the wife a few times when she owned a cobalt. Took all her keys off the key ring. What would happen, is you hit a bump and the 8million work keys she had on the ring would turn the key because of the angle it sat at when running. Never happened when I used the spare key as it...

All of Canada was below freezing today. That doesn’t happen often. The west cost is usually warm.

Torque wrench. I have 2, one is 3/8 drive and one is 1/2” drive. they are IMO a very important tool.

-22 today. Decided to skip on doing any outdoor work. Even my pup didnt want to play outside.

Sounds about right. I got mine and used it once so far... technically twice, but the second time was to clear a path in The backyard that’s Never been plowed

This is how I asked the dealer to set up 3rd function. The hoses to the front can be popped out of the bracket and I’m going to make a bracket so they lock to the tractor when the loader is off. The lines to the rear are permanently plumbed in to currently run my blower rotation; however I plan...

I find when Im driving backwards for a bit that i sit too far forward on the seat and the switch gets tripped. It needs to be a little longer IMO.

That was a great video. I watched a pile of both their videos before I bought my BX. Deere was not on my list just due to dealer location. Kubota, mahindra, Massey, and koiti are all available to me in less than a 45 min drive.

-22c today and BX spent the night outside. Kids jeep is in the garage so I can work on it. I am going to test the 30sec on the glow plugs and fire it up. Normally it lives in the garage and I can easily plug it in for a bit, being new I don’t expect it to be slow to start but it never hurts to...

I do use standard side cutters, but I hold them flush to the head of the tie, usually gives me a clean enough cut. I’m actually planning on swapping out the ties on my rops from putting on my lights. I couldn’t get black ones cause the stores were closed so I used white ones.. now I have a...

if you dont cut the tail off the tie, did you actually finish installing it???

Got the tractor back from the dealer, ready to work. Borrowed my buddies 66” 440lb hla grapple. Used it for a bit and decided that it’s just too heavy to work effectively. I could pick up some of the brush and wood but not enough to make it worth the effort. I will have to wait till a smaller...

F550 can tow over 20,000 lbs with a canopy dont you have to load it backwards so the wind doesn’t take it? How much does that load weigh? Can’t be more than 40-50% of what that beast of a Ford can tow Eh?

John, when you click reply. Type your response after the /quote] and your response wont Show up in the quote. what jay is suggesting is exactly how I would do it. If you’re not in a rush to buy you can pay attention to the sales and likely get one without paying full price. Also, being self...

They don’t have them on from the factory at lease not where I was shopping. My dealer welds on hooks for free when you buy a machine. surprised me how much I actually use them.

love the hubcaps! That machine looks like it’s been well taken care of. You could probably get a new deck and have A shop make the brackets fit your machine.