Search results

Nice score! :cool: I paid $200 for a 5 foot set several years ago and thought I got a steal. I had looked at several others ranging from $600 to $1000. :eek:

part # 3426-36880 is what you need to stop the handle from just falling - you need 2 of them if they are worn out if not tightening nuts #32 and #33 will increase friction.. For schematics for your tractor, click the link below. http://kubota.com/part/partsList.aspx 1) scroll down and check...

I have a L275 with a BF400 FEL. There are 4 hard hydro lines on it. 1) Large suction line going to the pump. 2) High pressure line from pump to just in front of the seat. 3&4) come from a junction block below the left side of the seat 3 is the high pressure to the FEL and 4 is the return...

Trading in wifey :eek: is a lot more expensive than trading in tractors.

I had this happen to me 2 years ago. The front seal on the hydro puml failed and FILLED the engine with oil to the point that it was coming out the vent on the top of the engine. I was bush hogging at the time. I shut it down immediately. Miraculously I did not blow the motor and have not suffer...

I see bent spindles and stress cracks in your future. :eek: My brother also believes in mowing at warp speed, can not get him to slow down. Two spindles and a pulley so far this year - belts aaaaaaah lost count. He is a slow learner.:rolleyes:

Are you talking about the NO 7, Part Number 35200-26100, ASSY DIFFERENTIAL or NO 4, Part Number RING GEAR? $558 shipped for what you see. [Part Number 35200-26100, ASSY DIFFERENTIAL - they left the bearings on charge].

LOOK what Santa left on the porch today. :D PS. He was in disguise for the summer, he was in brown with a brown sleigh. :cool:

I feel your pain.:( Pic's of mine can be found here post #10 & #19: http://www.orangetractortalks.com/forums/showthread.php?t=10866 Good luck

"Access denied. The parts catalogue is only available to customers of Kubota Canada Ltd. utizlizing an IP address that has been geo-located in Canada." It is pinging off your IP address which locates you in the USA therefor denying you access to the Canadian parts lists. You will...

Hope this is what you are looking for. http://kubota.com/part/partsList.aspx Scroll down and check [ I accept the Terms and Conditions ] click open then enter the model number at the top of the page. Good luck and sorry to hear about your PC,

This will do it. :cool:

"When you have eliminated the impossible, whatever remains, however improbable, must be the truth." - Arthur Conan Doyle :cool: Glad you solved the puzzle.

Think of it as High Quality Hydraulic Fluid being cheap insurance. Parts, down time and poorly functioning machinery is $$$$$$$$$$ If you own machinery it is going to cost you something sooner or later. How much and how often you do have some say in. Spending more $$$ now on fluids and lube...

Glad I could help. Good luck with the repair.

Part #18 is your oring seal part #37720-43550 Part #23 is your seal oil part #35650-43530

To find a parts diagram: http://kubota.com/part/partsList.aspx scroll down check the box - I accept the Term and Conditions MODEL NAME - enter L245 - click on search under BOOK - click on OPEN click on - +Front Axle And Front Wheel - [to expand] click on - 059000 +Front Axle Support - [to...

Thanks for your kind words. As soon as I get the parts in, I plan on starting the reassembly process - SLOOOWLY! If it takes a week it takes a week. If it takes a two week it takes a two week etc. Better that then trying to put it back together in one day and end up back in surgery and months...

There are 4 pins on the shift diff lock. Over time 2 of them scored the diff case and gear diff slide not allowing for proper locking this lead to catastrophic failure. The funny part is that the rear axle was still locked with all this damage and broken parts hanging around. Broke: shift diff...

deleted deleted