Search results

You NEED to talk to your insurance agent! I too have an umbreller policy and its coverages and limitations are different than those reported above. Insurance coverage can very greatly from policy to policy within one company. Than you have many differences from company. Than you have...

If you remove the high pressure supply, even with the tractor not running, be careful. There is an O ring in there that is easily lost.:eek:

Thanks for posting all those pics.:)

I seldom loose my temper - too costly. Last winter I decided to take my frustrations out on the wood pile with a 8lb splitting mall. Messed up my right shoulder and upper arm royally. Still recovering from that.

That appears to be exactly what I need, unfortunately I can not bring them into focus or enlarge them with any clarity. The good thing is that I know there is an answer. If possible, could you post a clear image. My sincere thanks for your time: Keith

Add a zero or two.:eek: And you thought tractor parts were expensive.

Thanks for your reply. I have talked to 6 different Kubota service dept - no help there. I have called machine shops - no help there. I have sent an email to Kubota corp asking for info - no response yet. I have sent an email (today) to Service Vic asking for info - no response yet. I have...

Have someone follow you with their flashers on. Also like murphy said, put a slow moving vehicle triangle on it, if anything happens your insurance will like you a little better. JMHO:)

We have an agreement. I don't clean the house and she doesn't clean the basement, garage or shed. I keep telling her that she got the best part of the deal. :D

Moth balls, that is right Moth Balls. I used them for years with my camping trailer and boat and never had a problem. Put some under it, on it and in it (depending on what IT is). Put some on the manifold, air intake etc just remember to remove them before using IT. If it is closed up like a...

I recently asked a Kubota dealer this same question and he said that I would need a L4600 to lift 2000lb on a semi regular basis.

Just checked the old bearing that was taken off and the new one that was pressed on. It is installed correctly. Thanks

WOOOWWwww! That was quick. Just had it two days and already taught it to stand on it's bucket. IMPRESSIVE! :D

Sorry, but I have to at least partly disagree with you on this. My cousin gave me a clipper 400, he had used it a couple of times and then got a 5' Land Pride. I used it for 3 years and had to replace the bottom oil seal on the gear box an least yearly. I had to weld on a heavy reinforcing...

When I had the flywheel turned for $5.00 more I had them remove and install the new bearing. Is it posable, yes but I do not believe so. "I have tried using longer bolts on clutch cover 1 to engage the bearing sooner but this did not help." These bolts were used just to see what would happen...

Yes, I adjusted it all most all the way out and the bearing still was not close to the release levers. Pressing down on the peddle disengaged the first stage then bottomed out unable to release the second stage. The second stage lockout on the outside of the case was flipped up allowing full...

Thank you for your reply. I have adjusted and readjusted the clearances several times without any luck. When I bolt the clutch assembly to the flywheel the release levers drop down quite low into the center of the clutch assembly as it is being tightened up. When the clutch peddle is depressed...

When you have the flywheel turned on a Kubota L275 with a two stage clutch, what are the Reference Value in millimeters for the difference in height between the outside of the flywheel, (where the Pressure Plate rests), and the inside of the flywheel where the Clutch Disc is compressed...

The Mahindra dealer near me, about 5 miles, closed 3 years ago without any warning.