Search results

Added 3/4 ton of rip rap to the raised bed, trying to keep the pic-a-pans (ground squirrels) out. They are a terror here, hope they are weight lifters ! Chicken wire or poultry netting just rusts away. This 'Harbor Freight thing' was left on the property, Worked Great! (even after 14 years+...

Did a bit of excavating for a raised bed. I received this in lieu of payment for a small job last year. Finally decided to get it out of my way and put it to use. Eventually to be covered with an 8 X 8 greenhouse.

Had some warm weather finally, got the last decal on the Tiller!

This is for the B7000, I have no idea how close if at all it is to the B7001?

The screenshot I posted earlier was from www.tracpartz.com, while this one also has four terminals they do not list it for the B6000, nor do they have a listing for a B6000 starter switch, but it is considerably cheaper. Coleman According to Messick's this should be the part number but it is...

On the B6000 it should be just like my L1500, a single start / pre-heat switch, depending on position?

Yeah this one is always just been a single screen, it cleaned up really good. The photos I see online for my particular engine also show what looks to be a single screen filter.

Am I missing something, there is only that screen nothing on the inside except about a 3/4 in void, it's basically hollow?

Got some time to look at the hydraulic pump issue. Popped out the screen it wasn't very bad I had a few little bits here and there. Has new oil now. Filled the pump with oil put it back on. Nothing. Cracked the high pressure line at the entrance to the rear of the tractor, fluid squirted out...

You might try these two in Greece, I have received transmission parts from Stavros Savva & Son Ltd Stavros Savva & Son Ltd Anatsoltis Mon. AE

Yep, mine is about 850', it is a great help! Hopefully gets some paint this year.

OOOPS! No, 2019 Bought the tractor in 2015

I was able to find a little information on this piece. Was made for David Bradley somewhere around Lubbock Texas and sold through the Sears catalog in 1958!

Maybe? Both were replaced in March 209 with NGKs. Seems they should have lasted longer than that. The ones from Reliable fixed the hard start problem. On to the pump.

Well, it seems very odd, but I suddenly have not one but two bad glow plugs? Hydraulics stop working, engine stalls, hard to start=bad glow plugs? I guess there is such a thing as coincidence-maybe?

Who knows, is cavitation or loss of prime a possibility? Hydraulics is NOT my forte, it spins freely and the remaining oil in the pump 'flows'. I may partially submerge in oil and spin to see what happens. Fortunately, I got most of what I needed the tractor for before this happened. The...

I am almost more concerned with the sudden 'hard starting' at this point. A quick check shows 12VDC to the glow plugs, but need to continue with snow removal at this point.

Well apparently that question was dumb and pre-mature, DUH, there is a gear on the shaft! Next time pay better attention to the picture in the book. Oddly enough, the pump seems okay, I will break it down and inspect. I am not a believer in coincidences, but the tractor is very hard to start...

Apparently, burned up the hydraulic pump! Been moving snow all morning after the 36" dump we got. Lost all hydraulics and the pump is hot and smoking. This is one area of the tractor I am not so familiar with, as the hydraulics have been trouble free since 2015 when I purchased the tractor...

Apparently, burned up the hydraulic pump! Been moving snow all morning after the 36" dump we got. Lost all hydraulics and the pump is hot and smoking. (cannot find a way to upload a FB Video) Has any one used Reliable Aftermarket Parts? They have one for $194.99