Search results

Skeets, When it comes back (sorry), run Malwarebytes as in my previous post. For a comparison of malware programs, see the following: https://www.youtube.com/watch?v=_P3fml12ggI Malwarebytes will take care of most issues, but if not, there are other programs we can run that target specific...

Start with https://www.malwarebytes.org Download and install the free version. Once installed, run it. It will update malware definitions (4-5 minutes), and then you will need to let it run against your computer. It will take a fair amount of time usually. DON"T STOP IT! Eventually it will...

Thank you Vic!

All, Well, I got bad news , good news, and great news. Bad news - I crushed the lower ball bearing carrier trying to synch the nut and sector shaft. Good news - The new ball bearings fit the old carrier. Great news - It is all together and working, however.... I just could not make Vic's...

All, OK....got shims done, now trying to get teeth of nut and sector shaft aligned. Does anyone know how many turns there should be left to righ? I think I have it in the right place, but I only get 2.5 turns lock to lock and I can't remember how many it was before I took it apart. Is there...

All, In completing my steering box rebuild, Vic says; "add a dab of red paint to the filler".....and in the picture (See attached) I noticed quite a few dabs of red paint at different points. My question is, are these "red paint dabs" standard on Kubotas? And Is it red paint, or is Kubota...

Bought my B6200 hood from them....good price, fast delivery.

My dogs....both rescues from Harris County in Texas. October was two-fer month, so we got them both for $50. Jerry is the Miniature Dachshund, and Jasper is the Great Dane. They are both pretty good dogs, but I think the Dane is a little emotionally stunted. The third picture is my attempt...

OK, Steering shaft got here two days early!!! So here is my one remaining (for now) question.....it concerns the shims on the top of the steering box. Everyone just says to use what was there, but.......In my case what was there was some silicone "form-a-gasket" gunk, and no shims. My...

Have you thought about tire chains? It really sounds like you need dedicated Ags, but chains might help for now.

All, Just sharing/bragging/being prideful. Part # 67111-53520 from Kubota is described as a NET RADIATOR. It lists for $63.72, plus what I am sure is at least another $12.00 worth of shipping, so rather than spend the money, I made my own. The screen is the red circled item in the first...

All, Well, the tool hound in me wanted to get the stud remover, but I took ShaunRH's vice grip idea and wrenched it of...it was not as hard as I imagined. Whoever put the stud in screwed up the thread, so I am going to get a fine thread tap and clean things up before I put the new stud in...

All, OK, I want D2Cat's grease idea to work, but.... I think North Idaho Wolfman's post is closer to what I will experience, so..... While a new steering box I could just bolt in would be nice, I decided to order a new shaft/nut/complete unit for $117 + $0 shipping off a company on ebay that...

Hi, (For those who keep seeing my posts, yes I am pretty much redoing everything on this tractor!) The latest rebuild is the steering box. My problem is that I have issues on many of the parts with what I would call rust, marring, pitting. There are 52 ball bearings (I thought there were...

Hi, Well, I took the easy way out. I called a place in Wisconsin. They had a B5200 in the right serial # range, so the part number was the same. They sold me a hood with no rust, no front damage, and slight (by the gas tank cap) damage in the back for $110 + Shipping. Shipping was $50, so I...

All, I have a stud on my front left wheel that is not screwed in all the way (see pictures). The perfectionist in me says this need to be fixed. The worry wart in me says "You are going to break something!" Would y'all leave it, or try and get it out and replaced? If you think take it out...

Dave, Thanks. That answered the question. I was wondering if there were bolts at the back of the tracks. If you happen to notice, if you can see in there, could you let me know how many rollers are in the tracks? You can't see in the one side, but you might be able to see in the side with...

Hi, (Second time posting this, not sure what happened to the first one) The seat rail on my B6200 is messed up. I can figure out that the circled part #090 (see attached drawing) stops the seat from going back too far, but I can't figure out what stops the seat from going too far forward...

Found it in the owners manual. Lower circled hole. Thanks.

Hi, Stupid question. Which hole does the spring that holds the grill on go for the B6200. See attached image. Is it one of the top holes, or the lower hole that is circled? Thanks, Jim