Search results

I could get more done, if I can keep this guy out from behind the wheel , he just loves to drive now.

Gdemos, Thanks for the kind words and your questions. 1. Snow Blower,I have seen the mods on the snow shoot, so if electric , drill and seal, run wires through lower cab wall with quick disconnects to blower so you could take back wall off when needed, and to your control console or dashboard...

Sorry for no more updates this weekend on the foam tape. I did not like the way it turned out because the foam did not hold up to having the levers moved back and fourth multiple times. I have to figure out somthing better so when I show it to you, i have proven it works. I wish I could have...

here's a pic of me and the wifey just after it snows

Are the lights and strobe , on the same ligjt switch or separated?

Let me know what you want on wiring or wipers because I have thousands of pictures of everything. Good luck on your build, you will love it when finished. I spent hours on making the wiring look nice and right. I would say when you get started, keep going till finished. I went hard for a...

do the regular headlights still work without the strobes being turned on?

John, Great job on the lights, I like it, will have to incorporate it into mine.

bandaidmd, Thank you for the comments on the sound. I have be thinking of adding sound deadning material, for under the hood and in the cab on all the walls and floor. This will have to be done while I am on vacation in two weeks, when I have more time to put into that project. Just looking...

bandaidmd Thank you for your comments I don't cut five acres of grass with this tractor, my wife uses the big zero turn for that. I use the radio/CD player, all the time when working out side of the tractor in the woods or in the barn or just riding down the road. Even while driving and...

Finished the three levers under the seat Cut up a rubber mat I had, cut to fit and used silicon water proof glue , done. There is a rubber mat cut to fit under the seat also. That should just about be all I need to keep the heat in.

I decided to go a different way, for closing the air gaps , on the control levers on both sides of the seat. FOAM TAPE. KISS method (KEEP IT SIMPLE STUPID)

Closing up air gap on left side of seat remove rubber handles make a templet out of paper and card board cut out rubber mat trim rubber mat to fit cut out line for handles to move in Tape or glue down rubber mat

some cab pics along with over head console I am working on closing up control lever arms on each side of the seat next, so I will post pictures when I am done.

Mani1147, The gear shift boots are: "MR Gasket Co." part #9648, www.mr-gasket.com, purchased at "Advanced Auto Parts" store. I decided to take some pictures with the cab cleaned up. WildFire would be proud.

some more pics of the chain hooks

Ron, Thanks for the kind words. I purchased the "BroTech" tool box, which comes with the metal side mounting brackets, which I used their bolts and holes to line up with. I then purchased the hooks and tie-downs from local tractor supply company, and cut a notch in the chain hook for the...

Close up of the BroTech, tool box , and added some chain hooks and tie downs all in one that I made (got the idea off the internet) in case i need to pull something or tie tractor down while on a trailer. Last pic shows the BroTech, tool box in the up position (comes with two locating holes to...

Work light installation , rear and side.

Kennyd4110 I set aside two weeks to get this conversion on the tractor done, with a $2000.00 budget for everything. So I might have been in a hurry and did not understand the spacers at the time. I like your stuff very well. For a guy who doesn't have any welding tools, these were the trick...