Search results

Are you getting fuel to the injectors when you open the line?

This is what happens when you don't grease your anti scalp rollers.. the bolt that hols the rollers looks like a cam shaft! Going to order new bolts for the new rollers and 1 more of the roller adjustment bars as it's bent and I didn't notice till I tried to take it out and it got stuck half...

Doing the deck maintenance for the bx2200.. changed out the old worn out blades for new oem Kubota blades, was trying to figure out how the gear box comes off to change the belt, which is in better shape than I thought, had it all lose, decided to check the gear oil in it and it was empty...

Doing a full service on the new to me bx2200 at 562 hours. New oil and filter, both fuel filters, air filter, hydraulic oil filter too.. Spent about 300 at messicks, bought Tuesday night and the parts were delivered to South Florida this afternoon Got new anti scalp wheels for the 54 inch...

I decided to pull the 3 point arms off my bx2200.. dont have anything to use them with and they make the tractor 2 feet longer.. Was a bit of a chore, the 1 inch thick bar that holds the lower arms on is tweaked a bit, and the adjustable links are bent pretty good no idea how the old owner...

Mine is about the same.. I rarely have it set above 1900 rpm, just does not need it

Hook up jumper cables to a fully charged battery, ground on tractors battery ground and tap the jump cable on the solenoid nut that goes to the starter.. if it spins, that will tell you if your solenoid is bad or if its the starter motor.. if nothing happens check the ground cable on the...

Spent about 4 hours today making sure all the 3 inch c channel was square, tacked the cross beam on the legs, stood them up got it all squared and level, tacked um on, then did the same with the 2 other cross beams and melted them together... its level! Looking on ebay and locally for a nice...

Finish the welding table, used the l2501 to flip it over on its wheel and bring it in the shop.. its really heavy, has to be in 4x4 to move on gravel or the rears spin.. with no 3 point weight on it

My 80 hour 8 month old l2501 loader tilt rams leak down with a lawnmower on a pallet.. the lift lift rams do not, that I've noticed..

Moved this 4x4 5/16th plate of steel I got for free...brought it in the shop to measure it to get 3 inch c channel cut to fit for legs and cross bracing.. will make a great welding/ work table.. have some sold 5 inch iron casters to put under it I've had laying around for years..

Took 2 weeks to get my bx23s.. before covid, watched alot of YouTube vids... took almost 6 weeks to get my l2501...that sucked! More YouTube.. looking at attachments, thinking if I should get a backhoe for it.. but that was not enough.. bought a b6100 with a belly mower, didn't like no power...

That is covid short supply high demand prices..

Best thing you can do is get a gas caddy with a manual pump and 5 foot long hose like this one. , or the 5 gallon fuel can with a small electric transfer pump, they are cheap on Amazon but you get what you pay for

I have a modest zero turn, a scag liberty z.. its a great mower, but... with 58 hours on it in 2 years the sealed blade bearings and starting to howl.. it was about 4800 new A belly mower pretty much can stay on the tractor, does not need engine maintenance, gasoline, hydraulic fluid and...

I love my l2501, but hate useing the rear finish mower on my 2 acres so much I bought a older kubota bx with a belly mower and sold the finish mower. I dont think you will have any issues moving yard stuff with the lx, but when you get past the 1000 pounds mark the l will beat the lx all day...

Have you tried to look it parts on messicks? They usually have parts diagrams with part numbers. I just found this thread about that mower https://www.orangetractortalks.com/forums/threads/mounting-a-k-48-mower-on-a-b6100d.19161/

Cleaned up and blew out all the stuff on the bx2200 I just got.. radiator had a few good clumps at the bottom and sandy dirt around the hydraulic steering ram.. guess that means I have a leak.. But this bx2200 is one of the cleanest older original tractors I've had...even has a New kubota...

Here is my new to me bx2200 on my new to me 6.5x12 trailer and new to me 2002 tacoma. Had the truck about 2 months, trailer about a month and the bx 3 days.. Drove around the neighborhood kept it under 50 just to see how it does.. slow.. stopping is not great but ok.. bought the truck and...

Bought another kubota.. this time a bx2200.. with 560 hours in very nice condition, unlike the b7300 I bought a few weeks ago.. My shop is stuffed with tractors now.. not complaining. One thing I noticed is the front wheels need a alignment so to say.. came with the canopy and 48 inch box...